Wireless infrared beam security system 4-beams

4-beams solar power wireless alarm intrusion security system.
Features:
1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition.
2. IP66 grade and can work at extreme weather condition such as storm days.
3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference.
4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration.

Description:
This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention.
4 beams 100m infrared detection distance New wireless beams detector easy perimeter security equipment installation and no interference.
Self-contained solar powered motion sensor alarm with sound. Built-in speaker and sound can be set as 5-60s or mute. Loud sound of 60dB.
RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function.
High reliability outdoor perimeter security
Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant
Totally sealed and with on the spot sounder built-in
Self-check and report to alarm host such as offset, low power, non working
It is used to prevent theft in courtyard, enclosure and other areas.
Functions and Specification:
1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux.
2.It is 4 beams wireless outdoor infrared detectors working by pairs of transmitter and receiver.
3.Irradiation distance:100m
4.Wireless transmitting distance:800m
5.Wireless frequency:433MHz
6.Maximum alarm times in 24 hours:<=50 times
7.Infrared light beam number: 4 beams
8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh
9.Working temperature: -30℃~70℃
10.Working voltage:3.3V
11.Power storage type: LiFePO4 Battery
12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA
13.Infrared light frequency: secondary modulation & encoding based on 38KHz
14.Infrared light wave-length: 940nm+/-20nm
15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux)
16.Dimension:590*84*45mm
17.Distance between infrared light hole: 35mm