Solar power wireless photoelectric smoke detector

Support NFPA 72 emergency evacuation signals in short buzz mode. Used alone or interconnected with other detectors (max. 40 sets)
Photoelectric Smoke Detector Smoke Alarm Solar power wireless fire detector. Can be used with same brand HB wireless alarm control panel with more than 500 zones for wireless fire alarm system.
1. Photoelectric Detection Method
2. Ceiling Mounting
3. Optical Labyrinth
4. Low power consumption and long service life;
5. The detector is powered via solar without use of external source;
6. When detecting smoke exceeds the permissible limit, the detector will send out a local audible and visual alarm and send out wireless alarm signals to the host at the same time.
7. Low-voltage alarm;
8. Manual test function;
9. Avoid the sensor's drift
problem;
10. Used alone or interconnected with other detectors (max. 40 sets);
11. Support NFPA 72 emergency evacuation signals in short buzz mode.
1. Sensor: Optical Cavity Labyrinth
2. Operating Voltage: 3.6V,2600mAH
3. Operating Current: Static Current: Less than 10uA; Alarm Current: 10-30mA;
4, Alarm Volume: 85dB at 10 ft;
5. Sensitivity to Smoke: Test value of 3.2% weak smoke per foot under ul217 Standard;
6. Wireless Transmitting Frequency: FM 433MHz;
7. Wireless Transmitting Distance: 100m (in open area);
8. Low-voltage Alarm: 2.2V±0.2 V;
9. Operating Environment: -10℃~50℃
10. Monitoring Area: 20 m2;