Wireless fire alarm system

Fire monitoring and prevention systems are required for all buildings. For residential fire prevention, you can connect smoke detector, heat detector, CO detector, combustible gas detector and other fire detector monitoring and alarm.

But for commercial buildings, factories, warehouses, shops and other places need to use a professional fire alarm system.

Professional fire alarm system can link automatic fire extinguishing equipment and so on. In a short time of fire can immediately point out the fire location, start the evacuation warning.

The fire develops rapidly and causes huge loss of personnel and property. In addition to people strictly following fire regulations and rules and precautions for the use of open flames, fire alarm systems should also be set up.

According to the size and use of the building site, the fire alarm system shall be set up in accordance with the requirements.

Read https://www.vedardsecurity.com/FIRE-ALARM-SYSTEM-TYPES-ezp-25

Traditional professional fire alarm and linkage system can monitor danger in real time and extinguish fire automatically. But it is complicated to install. Grooves need to be dug to lay cables. When a fault occurs, it is difficult to check and maintain the line.

Wireless fire alarm linkage system has become a substitute. But the reliability of the wireless alarm system is uncertain. Therefore, the wireless fire alarm system is only recommended for small commercial buildings and shops, beauty salons and other small and medium-sized places.

Professional wireless fire alarm system contains all kinds of fire detectors and fire hydrant buttons, and has a linkage output 485 interface, can be connected to the traditional wired alarm host. Can link automatic fire extinguishing device.

Professional wireless fire alarm system is easy to install. There is no need to lay cables, and the probe can be easily programmed through PC management software.