Security Alarms
Categories
- Conventional fire alarm systems
- Wireless Fire Alarm System
- LPCB addressable fire alarm
- Addressable fire alarm system
- Gas detection alarm system
- Electrical Fire Monitoring
- Fire Alarm Fire Extinguishing
- Fire Alarm gas fire-extinguish
- Commercial Burglar Alarm System
- Security Service Equipment
- |_ Focus security monitor CMS
- Commercial security solutions
- Industry Security Equipment
Languages
Important Links
Featured [more]
Wireless Fire Alarm Control Panel 64 or 128 points
Save: 13% off
Security Service Equipment
1000 zones wireless alarm control panel security service HB-G250
HB brand solar powered wireless perimeter break beam, solar power PIR, solar power fence grating system compatible wireless receiver center alarm panel and securty service equipment. HB-G250 has 8 wired zones and 992 wireless zones capacity. It is used for community security service with CMS software installed for PC windows operation and management. It has wired keypad for easy program detectors and zones. HB-G250 can equip with TCP/IP communication with RS485 interface and App monitor is available with it. Easy to build up security service center with HB-G250 alarm panel (refer to how to build up security service center at https://www.vedard.com/blog) with all types perimeter wireless security beams, detectors, indoor motion sensor, door contact, panic button, smoke detector, gas sensor, water leakage detector. Packing list: 1. PSTN alarm host X1 (ademco contact id protocol) 2.Wired alarm key panel X1 3. wireless remote X1 Product Introduction 1.8 wired and 992 wireless programmable defense areas. (Can work with same brand wireless detectors only) 2. Ademco Contact Id communication protocol. 3. 5 modes of defenses: departure defense, perimeter defense, single area defense, time delay defense, long distance defense. 4. 5 types of defense areas: instant defense area, time delay defense area, 24 hours defense area, perimeter defense and by-pass defense area. 5. 4 modes of disarming: password keyboard disarming, wireless remote control disarming, long distance disarming, alarm disarming. 6. Able to arrange defense, disarm the alarm, and emergency alarm by remote control. 7. Two sets of user passwords and one set of installation password. 8. Can prerecord 10-20s voice alarm. 9. It can dial 4 sets of telephone number (fixed or mobile phone number) and one set of alarm center number. 10. Parameter related to recording, monitoring, remote control, type of defense areas and telephone line inspection can be set as required through the key panel. It is tamper-resistant and lightening-proof. 11. With 110-220VAC power supply and 12V/7Ah backup battery. It can be accessed by a monitor head and at most 4 key panel. 12. Equipped with "watchdog" function so as to prevent the dead of halt of the system. low battery power alarm, non working alarm etc. 13. The receiving frequency is 443MHz.
$132.00
Alarm Panel TCP/IP communication module Solar beam security
HB-G250 HB brand solar power beam alarm panel compatible TCP/IP communication module. It is used for HB-G250 for RJ45 network communication. With this module, the HB-G250 can send alarm via TCP/IP network and app remote monitor is available. HB-WT-1 is optional alarm accessory for engineer alarm panel HB-G250 The size is small (142×92×25mm) and can be put inside the alarm panel. It is powered by alarm panel and connect to TCP/IP internet with RJ45 cable. Then the alarm event will be reported to security center or monitor mobile via TCP/IP network.And the security center can control the alarm panel via this TCP/IP communication module. Functions: 1. Remote control the alarm panel and receive alarm information via HB-WT-1 communicaton module. 2. User can use virtual keypad to remote alarm panel. 3. User can remote program the alarm panel. 4. User can inquiry arm/ disarm, bypass etc. alarm status and system information. 5. With alarm center management software CMS to monitor the alarm panel. 6. Authorize alarm panel operation. 7. Further development of the alarm system via SDK kit. Specification: Votage: DC12V-14V Working temperature:-40℃～60℃ Dimension: 142×92×25（mm） More solar power perimeter security equipment please check HB brand all wireless compatible solar beam, solar detector, solar motion sensor, smoke detector, gas sensor. All the products are professional security devices for both residential security, commercial security and industry security. Solar power perimeter security equipment is innovated for outdoor property security protection such as farm, pool, garden.
$70.00
BALCONY, WINDOW PROTECTION WIRED CURTAIN PIR WITH MW DETECTOR
Manufactured by: Focus Security It is designed for door, window or balcony area protection. Functions and Specification: 1.It adopts 2 groups dual PIR and MW technology. 2.Sealed design for weather proof features. 3.Pet immunity for maximum 25kgs and strong interference resistance. 4.Detection distance:3m/25℃ 5.Detection angle:20° 6.With function of tamper-resistant, self testing, low voltage testing, status report, pulse option etc. 7.2 groups direction for optional. 8.Sensitivity is adjustable to be suitable for different environment. 9.Working voltage:9VDC ~15VDC 10.Consumption current:100uA(standby), 35mA(alarm) 11.Installation: Wall mounted at height 1.8m ~2.4m 12.Dimension:230*66*36mm
$48.00
MICROWAVE BARRIER MCB-150 OUTDOOR PERIMETER SECURITY EQUIPMENT
Manufactured by: Focus Security Microwave barrier develops an electromagnetic beam using high frequency microwaves that passes from a transmitter to a receiver, creating an invisible but sensitive protection wall. When the receiver detects a difference of condition within its beam, it begins a detailed analysis of the situation that, if considered a real intrusion, provides an alarm signal that can be treated in digital form. The difference of Microwave Barrier and infrared barrier is the protection area and environment endurance. On these two aspects, Microwave Barrier performs better than Infrared Barrier. Microwave Barrier can form a cubic protection space and not just a line. The space is about 2.5m *5m and can be adjustable. Microwave Barrier can be installed at wall or fence of military sites, air port, power plants where high security requirement is needed. MCB-150 is hard wired Focus brand Microwave Barrier. Below is the details: MW frequency:10.525GHz Detection distance:150m Central barrier area width:5m Central barrier area height:2.5m Grass width:0.3m Snow width:0.5m Power input:12～18 VDC Working current Transmitter：25～30mA，12VDC Receiver：30～35mA，12VDC Alarm Relay capacity:（N.C.）50mA,20VDC Alarm time:≤3s Tamper switch capacity:（N.C.）0.1A,20VDC Max emitting power:35mW（common）；50mW（Max） Detection speed:0.1～10m/s Alarm output:≥3s Temperature:-40℃～+65℃ Humidity:Max 98% Dimension:158×113×46mm Water-proof design Built-in water-proof equipment, anti-rain/snow 30mm/h A microwave barrier is one of the most reliable and safe intrusion detectors used for outdoor perimeter protection.
$128.00
Break beam solar power wireless 6-beam perimeter intrusion alarm
6-beams solar power wireless alarm intrusion security system. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. 6 beams 100m infrared detection distance New wireless beams detector easy perimeter security equipment installation and no interference. Self-contained solar powered motion sensor alarm with sound. Built-in speaker and sound can be set as 5-60s or mute. Loud sound of 60dB. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is six beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 6 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:840*84*45mm 17.Distance between infrared light hole: 35mm
$123.50
CURTAIN PIR INTRUSION DETECTOR HARDWIRED CONNECTION
Manufactured by: Focus Security It is direction recognition curtain PIR detector. Functions and Specification: 1.It adopts digital micro-processor with energy pile-up logical process, random dynamic time split technology. 2.With high receiving effect by using precise column lens. 3.With tamper switch to avoid illegal open or moving. 4.Can enable or disable direction function and direction can be choosed. 5.Detection angle:20°Detection distance:6m /25℃ 6.Working voltage:9-16VDC 7.Alarm output:NC 8.Installation height:1.0 to 2.8m(3-9 feet) 9.Dimension:90*50*40mm
$14.50
Solar beams wireless compatible 32 relay output linkage module
HB-LD-32 is HB brand alarm control panel HB-G250 compatible 32 relay contact output linkage module. It can only be used with same brand alarm panel HB-G100. The 32 relay contact can be set to link with multiple alarm zones. One alarm zone can be set to link with one relay contact output only. The link correction can be checked. Relay contact status can be set to keep from 1--5999s. The relay contact can be linked with CCTV system for surveillance and video monitor. Specification: Working voltage: DC12V-14V Power required: >8W Communication interface: RS485 Static current: 100mA Single relay contact working current: 20mA Working temperature: -40℃～60℃ Dimension: 345×290×80（mm）
$93.00
Solar power wireless photoelectric smoke detector
Support NFPA 72 emergency evacuation signals in short buzz mode. Used alone or interconnected with other detectors (max. 40 sets) Photoelectric Smoke Detector Smoke Alarm Solar power wireless fire detector. Can be used with same brand HB wireless alarm control panel with more than 500 zones for wireless fire alarm system. 1. Photoelectric Detection Method 2. Ceiling Mounting 3. Optical Labyrinth 4. Low power consumption and long service life; 5. The detector is powered via solar without use of external source; 6. When detecting smoke exceeds the permissible limit, the detector will send out a local audible and visual alarm and send out wireless alarm signals to the host at the same time. 7. Low-voltage alarm; 8. Manual test function; 9. Avoid the sensor's drift problem; 10. Used alone or interconnected with other detectors (max. 40 sets); 11. Support NFPA 72 emergency evacuation signals in short buzz mode. 1. Sensor: Optical Cavity Labyrinth 2. Operating Voltage: 3.6V,2600mAH 3. Operating Current: Static Current: Less than 10uA; Alarm Current: 10-30mA; 4, Alarm Volume: 85dB at 10 ft; 5. Sensitivity to Smoke: Test value of 3.2% weak smoke per foot under ul217 Standard; 6. Wireless Transmitting Frequency: FM 433MHz; 7. Wireless Transmitting Distance: 100m (in open area); 8. Low-voltage Alarm: 2.2V±0.2 V; 9. Operating Environment: -10℃~50℃ 10. Monitoring Area: 20 m2;
$24.50
Wireless emergency button
Emergency Panic button wireless HB alarm accessory HB-A380 Product features: 1. Support long-time use, suitable for various environment 2. Adopt wireless signal transmission technology, no external cord line needed 3. Adopt 434.6MHz FSK frequency, which makes it more reliable in communication. Technical parameter: 1. battery voltage: DC 3V (button cell No. CR2450 2. Static current: 0 3. Working currency: 60mA 4. Working frequency: 434.6MHz 5. Wireless transmitting distance: >300m in open area 6. Working temperature: -10C ~+55C 7. Product size: 59*59*23mm How to use panic button: 1. enroll it to the alarm host unit. After host unit set into coding status (details refer to user manual of alarm host unit), press red panic button for seconds, if it is ready, LED indicator flickers. After host unit given one reminder beep, it means the button is enrolled succcessfully. Then set defense zone type. 2. trigger: a)when panic button in emergency defense zone, no matter arm or disarm, press panic button, it will sight alarms instantly. b)When panic button in other defense zone type, press this button, it will not trigger alarm unless its defense zone was armed. 3. Delete code: Operate at host unit for delete code. FCC statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
$11.00
solar power wireless curtain pir detector HB-T201
Wireless FSK+FHSS alarming make sensor immune to signal-interference and false alarm. Strong anti-interference abiliyt to electromagnetic wave, strong light, small pets, which cut false alarm to the bottom. Solar charge Panel Voltage 5V 2.Standby battery 3 6Vlithum battery Volume 8500mAh 3 Working current Standby current 40uA 4.Detection Range: 8m, wireless transiting distance:500m HB T201 HB T205 HB T305 3 6Vlithum battery Volume 2 00mAh Alarming current 60mA 6 m, wireless transiting distance:500m Detection Angle: 4 (horizontal) 1 (perpendicular). Size 1 mmx8 mmx50mm Transmitting Frequency 433MHz FSK FHSS Transmitting time 5 seconds Working temperature -10- 55℃ How to program the solar pir detector? Learn it at https://www.youtube.com/watch?v=0T8TfoLqAHQ
$15.50
Solar power wireless PIR detector
HB-T205 Solar-Powered Wireless PIR Detecotor Used for drawing room，stair，lobby etc 1.Solar energy weakness light such as natural light, LED light charging design, no need of external power line, the design life is 10 years. 2.Standby current is as small as μA stage. 3.Strong anti-interference capability for disturbances of electromagnetic, strong light, small pets , low false alarm rate; 4. Sensitivity of sensor is adjustable, automatic temperature compensation; 5. Streamlined design, flexible and convenient installation, can be installed on wall, ceiling and etc. 6. Work with FM + FH signal , no need of external signal line 7. Use FM + FH signal , solve problem of the wireless signal is easy to be interference and wrong collection false alarm. 8. Has the function of fault self check, and report the fault to the host. Solar panels: 5V Emergency power supply: one 3.6V lithium battery Alarm current: ≤60mA Standby current: ≤40μA detecting angle: 100° Detecting distance:≥8m Wireless transmitting distance: ≥700m transmitting time:5s work environment temperature range:-10～+55℃ wireless transmitting frequency :433Mhz FH environment temperature range: -25～+65℃
$21.00
Wireless Frequency modulation transceiver Security Service
Solar wireless beam compatible alarm panel module wireless receiver and transmitter module. 1. RS-485 connection with alarm control panel HB-250G (for third party alarm control panel compatibility, please contact us to confirm) 2. The wireless transceiver is with function of HB wireless alarm signal receiving and transmitting. 3. It is used to strengthen the alarm control panel wireless receiving and transmission ability if the alarm panel is installed at closed place or with strong Wireless signal blocking. 4. Generally it is installed in an elevated position of the building. Be sure to take action for its waterproof and anti-thunder. For example, add a shield case. 5. HB-SFQ can work with same brand wireless alarm device only. 6. Frequency: 433MHz. 7. Wireless transmission distance: 3km Specification: working voltage：DC12V working current at receiving status: 46mA working current at transmitting status: 300mA wireless transmitting frequeny: 433MHz +FSK working temperature: -40℃～60℃ Dimension: 158×100×55（mm）
$52.00
8 Beam Sensor Wireless Solar power Perimeter Security Equipment
Solar & Wireless Beam Sensor 8-beams perimeter security intrusion alert and wireless alarm for public building, community security, farm security. Note: The sensor has built-in speaking for on-site warning. But it should be used with wireless same brand alarm control panel or wireless to wired transceiver and other brand wired panel for alarm signal sending, fault report to security service monitor company or personal mobile phone. App monitor panel is available with Wifi or GSM network with model number HB-5050 Features: Battery Powered&Solar Charged,no need cables. Up to 100 meters easy detection range. 1 KM wireless transmission Range. Multiple Detection Beams(to avoid false alarm--such as falling leaves or birds). Automatic Shielding of the sunlight interference. No external cables and the antenna inside the shell,so will not be damaged by the lightening strike. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Anti-interference,Using FSK+FHSS wireless transmission technology. 4/6/8 Beam Sensor has on-site alarm function. Technical Parameters Infrared Detection Range 100m Wireless Transmission Range 1KM Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity Transmitter:500mAh Receiver: 500mAh Static Working Current ≤1mA Infrared Wavelength 940nm±20nm Solar Panel Output Current 1800Lux illumination level: HB-T001Q8≥8mA (Remarks: The outdoor illumination intensity on rainy days is about 2000Lux) Working Temperature Range -30℃~70℃ Weight HB-T001Q8：4.8kg HB-T001Q8：1090×84×45（mm）
$148.00
Solar power wireless door sensor
Door magnetic contact wireless solar-powered indoor usage No need to change battery within 2-5 years. Very low standby current consumption FSK with hopping frequency wireless transmitting and no false alarm With self check and fault report function. Technology: solar panel: 5V working current: <=0.01mA Frequency: 433MHz with hopping frequency backup battery: 3.6V 2000mAh lithium battery wireless transmission distance: 300 m at open area Working temperature: -30~70C Dimension: 79*36*21mm
$16.00More Information
BOX_HEADING_TWITTER_SIDEBOX
Specials [more]
Wireless Fire Alarm Control Panel 64 or 128 points
Save: 13% off
Intelligent Fire Alarm control panel LPCB fire controller 1 Loop
Save: 18% off
