All Products

Alarm Control Panel is designed and manufactured to meet the requirement of BS EN54 Part 2&4. TX7004 comprise of a range of analogue addressable, microprocessor based fire alarm control equipment to offer flexibility in both design and operation. The System is modular concept for easy tailoring of system design, to meet the full requirements of the project. The TX7004 is designed to provide early warning fire detection, to quickly identify the location of fire and provide user definable text informing the occupants of the building of potential smoke spread. Simultaneously, the TX7004 will alert and evacuate the occupants, and control all necessary auxiliary command functions such as elevator control, air handling shut down, gas shut off & damper control, as per the cause and effects requirements configured though Command Builder Set-up The TX7004 modular construction panel, capable of supervising two monitored detection loops expandable up to four [4] loops on standalone basis. Each loop is capable to accommodate of 254 addressable devices of any combination with T&A protocols, namely intelligent sounder strobe TX7300 & intelligent sounder TX7320 complying with EN 54-3, rate of rise and fixed temperature heat detector TX7110 complying with EN 54-5, photoelectric smoke detector TX7100 complying with EN 54-7, intelligent manual call point TX7140 complying with EN 54-11, intelligent reflective beam detector (TX7130) complying with EN 54-12, input and output module TX7200, TX7210, TX7220 complying with EN54-18, and loop isolator TX7230 complying with EN 54-17. The T&A devices are fully loop powered to support saving cost of the cable. These systems incorporate a number of features to allow easy operation through a user-friendly menu. The TX7004 has a LCD touch screen and Keypad menus for alternative operation with large button access to operate the keypad control by fire brigade personnel providing total user-friendly interface for browsing and programming. Added the commission features such as colour coded loop mapping, dual address and device mismatch monitoring, one-man test, simplified command builder’s configuration that has proved to be highly rated by both commissioning and service engineers. The Control Panel has multiple built-in features. The loop card has built-in surge protection and the communication card interface support multiple interface protocol such as USB, Ethernet, CAN Bus, Serial, RS485, Fiber Optic in one singe card. The panel is Built-In Printer and 160 LED Zones Indicators. The panel provides variety of inputs and outputs interfaces and auxiliary such as Output to Sounder, F.P.E., Alarm and Fault output, Relays and Power Auxiliary. 1.2 Feature and Benefits • Compliance EN54-2 & N54-4 • Using advance microprocessor technology with Large memory capacity • Enhance user interface combining LCD Touch screen and keypad access • Support real time visual algorithm • Enhance false alarm prevention • Keypad and PC programming • Support Multiple interface protocol such as USB/Ethernet/Can Bus/Serial/RS485/Fiber Optic • Support Loop Powered devices for extra saving on cable cost • Built-In Printer and 160 LED Zones Indicators Commissioning Advantage • Auto Enrolling of Devices • Loop Mapping with colour coding status • Monitor device mismatch and dual address conflict • Command Builder to create requirements for fire event scenario • With Loop protection against power surge • One-man test with On/Off sounder • Programming Protection System Capacity • Up to 4 loop • Support 254 Devices/One loop (1,016 ideal) • Network up to 512 Node • Programmable Capacity • Zones up to 3000 • Sounders Groups 1-1000 • Other Groups 1001- 2000 • Built-in 160 LED Zones Indicator 1.4 Technical Specification • Compliance EN54-2 & 4 • Input Voltage 230VAC +10%-15%, 50Hz (120VAC, 60Hz, it is not applicable for EN54 & Not tested by LPCB) • Input Current Consumption 1A • PSU Output To CIE 21.5~28.5VDC • Batteries Maximum Charge Capacity: 2 x 12V / 28AH Maximum Charge Current: 1.2A I maxA: 0.93A I maxB: 2.53A Minimum Quiescent Current: 0.45A(Imin) Maximum Internal Resistance: 1.0Ω Rechargeable-Lead acid type battery • Recommended manufacturer and model of battery: PS-12280 12V28AH (Tested With CIE By LPCB) • Networking and Interfaces Panel to panel communication Can Bus [loop] Number of Panels 512 Interface Port USB, RS485 Serial, RS232 Serial, Ethernet • System Capacity Memory [Non-Volatile] 1000 Fire Events, 10,000 General Event Zones 3,000 programmable Total Group 3,000 programmable Sounder Group 1,000 programmable Common Group 2,000 programmable • Loop Specifications Protocol/Addressing T&A, Value range from 1 to 254 No. of Loop 4 Loop Protection Built-in 4kV Surge protection Power rating 16~24Vdc /120mA Cabling 1.0Km Max Length/2 x 1.5mm²solid core Fire resistance • Recommended Wiring (subject to local installation codes) ISST-SFR3/ 711c-(cl-5) Intelligent Safety & Security Technology Limited NoBurn XPS/ 682e/01 Ventcroft Limited FT30 SAFFIRE/ 1134j Draka UK Limited Context Plus/682a-(cl-3) Context Plus Ltd FP200 Gold LSOH/ 077k/01 Prysmian Cables & Systems Limited And all LPCB approved Fire cables Recommended Cable Length ≤1000m • Panel Input/outputs Programmable Relays 4 circuits: Normally Open/Close Programmable Input 1 Circuit: Current Limited 24Vdc (for future use) Programmable Auxiliary Power 19~28Vdc (Current Limited) Fixed Outputs (FPE/Sounder) 2 Circuits: 18~28Vdc (Current Limited) • Indicator 24 LED Status/ 160 Zone Indicators • Display 7” TFT Touch Screen • Keypad 5 Brigade buttons and Programming Keypad • Material / Color Flat sheet Metal / with outer glass door, Orange stripe • Dimension Lx W x H 530 mm x 490 mm x 135 mm • Weight 16.70 Kg • Temperature -5℃~+40℃ • Humidity 0 to 95% Relative Humidity, Non condensing

Alarm Control Panel is designed and manufactured to meet the requirement of BS EN54 Part 2&4. TX7004 comprise of a range of analogue addressable, microprocessor based fire alarm control equipment to offer flexibility in both design and operation. The System is modular concept for easy tailoring of system design, to meet the full requirements of the project. The TX7004 is designed to provide early warning fire detection, to quickly identify the location of fire and provide user definable text informing the occupants of the building of potential smoke spread. Simultaneously, the TX7004 will alert and evacuate the occupants, and control all necessary auxiliary command functions such as elevator control, air handling shut down, gas shut off & damper control, as per the cause and effects requirements configured though Command Builder Set-up The TX7004 modular construction panel, capable of supervising two monitored detection loops expandable up to four [4] loops on standalone basis. Each loop is capable to accommodate of 254 addressable devices of any combination with T&A protocols, namely intelligent sounder strobe TX7300 & intelligent sounder TX7320 complying with EN 54-3, rate of rise and fixed temperature heat detector TX7110 complying with EN 54-5, photoelectric smoke detector TX7100 complying with EN 54-7, intelligent manual call point TX7140 complying with EN 54-11, intelligent reflective beam detector (TX7130) complying with EN 54-12, input and output module TX7200, TX7210, TX7220 complying with EN54-18, and loop isolator TX7230 complying with EN 54-17. The T&A devices are fully loop powered to support saving cost of the cable. These systems incorporate a number of features to allow easy operation through a user-friendly menu. The TX7004 has a LCD touch screen and Keypad menus for alternative operation with large button access to operate the keypad control by fire brigade personnel providing total user-friendly interface for browsing and programming. Added the commission features such as colour coded loop mapping, dual address and device mismatch monitoring, one-man test, simplified command builder’s configuration that has proved to be highly rated by both commissioning and service engineers. The Control Panel has multiple built-in features. The loop card has built-in surge protection and the communication card interface support multiple interface protocol such as USB, Ethernet, CAN Bus, Serial, RS485, Fiber Optic in one singe card. The panel is Built-In Printer and 160 LED Zones Indicators. The panel provides variety of inputs and outputs interfaces and auxiliary such as Output to Sounder, F.P.E., Alarm and Fault output, Relays and Power Auxiliary. 1.2 Feature and Benefits • Compliance EN54-2 & N54-4 • Using advance microprocessor technology with Large memory capacity • Enhance user interface combining LCD Touch screen and keypad access • Support real time visual algorithm • Enhance false alarm prevention • Keypad and PC programming • Support Multiple interface protocol such as USB/Ethernet/Can Bus/Serial/RS485/Fiber Optic • Support Loop Powered devices for extra saving on cable cost • Built-In Printer and 160 LED Zones Indicators Commissioning Advantage • Auto Enrolling of Devices • Loop Mapping with colour coding status • Monitor device mismatch and dual address conflict • Command Builder to create requirements for fire event scenario • With Loop protection against power surge • One-man test with On/Off sounder • Programming Protection System Capacity • Up to 4 loop • Support 254 Devices/One loop (1,016 ideal) • Network up to 512 Node • Programmable Capacity • Zones up to 3000 • Sounders Groups 1-1000 • Other Groups 1001- 2000 • Built-in 160 LED Zones Indicator 1.4 Technical Specification • Compliance EN54-2 & 4 • Input Voltage 230VAC +10%-15%, 50Hz (120VAC, 60Hz, it is not applicable for EN54 & Not tested by LPCB) • Input Current Consumption 1A • PSU Output To CIE 21.5~28.5VDC • Batteries Maximum Charge Capacity: 2 x 12V / 28AH Maximum Charge Current: 1.2A I maxA: 0.93A I maxB: 2.53A Minimum Quiescent Current: 0.45A(Imin) Maximum Internal Resistance: 1.0Ω Rechargeable-Lead acid type battery • Recommended manufacturer and model of battery: PS-12280 12V28AH (Tested With CIE By LPCB) • Networking and Interfaces Panel to panel communication Can Bus [loop] Number of Panels 512 Interface Port USB, RS485 Serial, RS232 Serial, Ethernet • System Capacity Memory [Non-Volatile] 1000 Fire Events, 10,000 General Event Zones 3,000 programmable Total Group 3,000 programmable Sounder Group 1,000 programmable Common Group 2,000 programmable • Loop Specifications Protocol/Addressing T&A, Value range from 1 to 254 No. of Loop 4 Loop Protection Built-in 4kV Surge protection Power rating 16~24Vdc /120mA Cabling 1.0Km Max Length/2 x 1.5mm²solid core Fire resistance • Recommended Wiring (subject to local installation codes) ISST-SFR3/ 711c-(cl-5) Intelligent Safety & Security Technology Limited NoBurn XPS/ 682e/01 Ventcroft Limited FT30 SAFFIRE/ 1134j Draka UK Limited Context Plus/682a-(cl-3) Context Plus Ltd FP200 Gold LSOH/ 077k/01 Prysmian Cables & Systems Limited And all LPCB approved Fire cables Recommended Cable Length ≤1000m • Panel Input/outputs Programmable Relays 4 circuits: Normally Open/Close Programmable Input 1 Circuit: Current Limited 24Vdc (for future use) Programmable Auxiliary Power 19~28Vdc (Current Limited) Fixed Outputs (FPE/Sounder) 2 Circuits: 18~28Vdc (Current Limited) • Indicator 24 LED Status/ 160 Zone Indicators • Display 7” TFT Touch Screen • Keypad 5 Brigade buttons and Programming Keypad • Material / Color Flat sheet Metal / with outer glass door, Orange stripe • Dimension Lx W x H 530 mm x 490 mm x 135 mm • Weight 16.70 Kg • Temperature -5℃~+40℃ • Humidity 0 to 95% Relative Humidity, Non condensing

Alarm Control Panel is designed and manufactured to meet the requirement of BS EN54 Part 2&4. TX7004 comprise of a range of analogue addressable, microprocessor based fire alarm control equipment to offer flexibility in both design and operation. The System is modular concept for easy tailoring of system design, to meet the full requirements of the project. The TX7004 is designed to provide early warning fire detection, to quickly identify the location of fire and provide user definable text informing the occupants of the building of potential smoke spread. Simultaneously, the TX7004 will alert and evacuate the occupants, and control all necessary auxiliary command functions such as elevator control, air handling shut down, gas shut off & damper control, as per the cause and effects requirements configured though Command Builder Set-up The TX7004 modular construction panel, capable of supervising two monitored detection loops expandable up to four [4] loops on standalone basis. Each loop is capable to accommodate of 254 addressable devices of any combination with T&A protocols, namely intelligent sounder strobe TX7300 & intelligent sounder TX7320 complying with EN 54-3, rate of rise and fixed temperature heat detector TX7110 complying with EN 54-5, photoelectric smoke detector TX7100 complying with EN 54-7, intelligent manual call point TX7140 complying with EN 54-11, intelligent reflective beam detector (TX7130) complying with EN 54-12, input and output module TX7200, TX7210, TX7220 complying with EN54-18, and loop isolator TX7230 complying with EN 54-17. The T&A devices are fully loop powered to support saving cost of the cable. These systems incorporate a number of features to allow easy operation through a user-friendly menu. The TX7004 has a LCD touch screen and Keypad menus for alternative operation with large button access to operate the keypad control by fire brigade personnel providing total user-friendly interface for browsing and programming. Added the commission features such as colour coded loop mapping, dual address and device mismatch monitoring, one-man test, simplified command builder’s configuration that has proved to be highly rated by both commissioning and service engineers. The Control Panel has multiple built-in features. The loop card has built-in surge protection and the communication card interface support multiple interface protocol such as USB, Ethernet, CAN Bus, Serial, RS485, Fiber Optic in one singe card. The panel is Built-In Printer and 160 LED Zones Indicators. The panel provides variety of inputs and outputs interfaces and auxiliary such as Output to Sounder, F.P.E., Alarm and Fault output, Relays and Power Auxiliary. 1.2 Feature and Benefits • Compliance EN54-2 & N54-4 • Using advance microprocessor technology with Large memory capacity • Enhance user interface combining LCD Touch screen and keypad access • Support real time visual algorithm • Enhance false alarm prevention • Keypad and PC programming • Support Multiple interface protocol such as USB/Ethernet/Can Bus/Serial/RS485/Fiber Optic • Support Loop Powered devices for extra saving on cable cost • Built-In Printer and 160 LED Zones Indicators Commissioning Advantage • Auto Enrolling of Devices • Loop Mapping with colour coding status • Monitor device mismatch and dual address conflict • Command Builder to create requirements for fire event scenario • With Loop protection against power surge • One-man test with On/Off sounder • Programming Protection System Capacity • Up to 4 loop • Support 254 Devices/One loop (1,016 ideal) • Network up to 512 Node • Programmable Capacity • Zones up to 3000 • Sounders Groups 1-1000 • Other Groups 1001- 2000 • Built-in 160 LED Zones Indicator 1.4 Technical Specification • Compliance EN54-2 & 4 • Input Voltage 230VAC +10%-15%, 50Hz (120VAC, 60Hz, it is not applicable for EN54 & Not tested by LPCB) • Input Current Consumption 1A • PSU Output To CIE 21.5~28.5VDC • Batteries Maximum Charge Capacity: 2 x 12V / 28AH Maximum Charge Current: 1.2A I maxA: 0.93A I maxB: 2.53A Minimum Quiescent Current: 0.45A(Imin) Maximum Internal Resistance: 1.0Ω Rechargeable-Lead acid type battery • Recommended manufacturer and model of battery: PS-12280 12V28AH (Tested With CIE By LPCB) • Networking and Interfaces Panel to panel communication Can Bus [loop] Number of Panels 512 Interface Port USB, RS485 Serial, RS232 Serial, Ethernet • System Capacity Memory [Non-Volatile] 1000 Fire Events, 10,000 General Event Zones 3,000 programmable Total Group 3,000 programmable Sounder Group 1,000 programmable Common Group 2,000 programmable • Loop Specifications Protocol/Addressing T&A, Value range from 1 to 254 No. of Loop 4 Loop Protection Built-in 4kV Surge protection Power rating 16~24Vdc /120mA Cabling 1.0Km Max Length/2 x 1.5mm²solid core Fire resistance • Recommended Wiring (subject to local installation codes) ISST-SFR3/ 711c-(cl-5) Intelligent Safety & Security Technology Limited NoBurn XPS/ 682e/01 Ventcroft Limited FT30 SAFFIRE/ 1134j Draka UK Limited Context Plus/682a-(cl-3) Context Plus Ltd FP200 Gold LSOH/ 077k/01 Prysmian Cables & Systems Limited And all LPCB approved Fire cables Recommended Cable Length ≤1000m • Panel Input/outputs Programmable Relays 4 circuits: Normally Open/Close Programmable Input 1 Circuit: Current Limited 24Vdc (for future use) Programmable Auxiliary Power 19~28Vdc (Current Limited) Fixed Outputs (FPE/Sounder) 2 Circuits: 18~28Vdc (Current Limited) • Indicator 24 LED Status/ 160 Zone Indicators • Display 7” TFT Touch Screen • Keypad 5 Brigade buttons and Programming Keypad • Material / Color Flat sheet Metal / with outer glass door, Orange stripe • Dimension Lx W x H 530 mm x 490 mm x 135 mm • Weight 16.70 Kg • Temperature -5℃~+40℃ • Humidity 0 to 95% Relative Humidity, Non condensing

Electrical fire monitoring system residual current detector. Built-in processor can receive the signal from transformer and handle those signal into two forms as normality and alarming, both of which will be transmitted to the electrical fire monitoring equipment. The microprocessor will transmit the mode status of normality or alarming to monitoring devices. How to use electric fire monitor equipment and how to install? Technical Features 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 93mm 7. Rated operating current of main loop: less than 630A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 188mm × 145mm × 45mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 1.3kg

Electrical fire monitoring system residual current detector. Built-in processor can receive the signal from transformer and handle those signal into two forms as normality and alarming, both of which will be transmitted to the electrical fire monitoring equipment. The microprocessor will transmit the mode status of normality or alarming to monitoring devices. How to use electric fire monitor equipment and how to install? Technical Features 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 93mm 7. Rated operating current of main loop: less than 630A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 188mm × 145mm × 45mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 1.3kg

Electrical fire monitoring system residual current detector. Built-in processor can receive the signal from transformer and handle those signal into two forms as normality and alarming, both of which will be transmitted to the electrical fire monitoring equipment. The microprocessor will transmit the mode status of normality or alarming to monitoring devices. How to use electric fire monitor equipment and how to install? Technical Features 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 93mm 7. Rated operating current of main loop: less than 630A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 188mm × 145mm × 45mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 1.3kg

Through-line aperture: 73mm； main circuit rated operating current: less than 315A Dimensions: 160mm × 118mm × 45mm Works with 2-lines bus loop JB-DH-TC5600 Electrical Fire Monitoring Equipment. TC-DH01B-70 Residual current electrical fire monitoring detector has built-in processor can receive the signal from the transformer and handle those signals into two forms of normality and alarming, both of which will be transmitted to the electrical fire monitor control panel. Technical Features 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 73mm 7. Rated operating current of main loop: less than 315A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 160mm×118mm×45mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 1kg

Through-line aperture: 73mm； main circuit rated operating current: less than 315A Dimensions: 160mm × 118mm × 45mm Works with 2-lines bus loop JB-DH-TC5600 Electrical Fire Monitoring Equipment. TC-DH01B-70 Residual current electrical fire monitoring detector has built-in processor can receive the signal from the transformer and handle those signals into two forms of normality and alarming, both of which will be transmitted to the electrical fire monitor control panel. Technical Features 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 73mm 7. Rated operating current of main loop: less than 315A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 160mm×118mm×45mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 1kg

Through-line aperture: 73mm； main circuit rated operating current: less than 315A Dimensions: 160mm × 118mm × 45mm Works with 2-lines bus loop JB-DH-TC5600 Electrical Fire Monitoring Equipment. TC-DH01B-70 Residual current electrical fire monitoring detector has built-in processor can receive the signal from the transformer and handle those signals into two forms of normality and alarming, both of which will be transmitted to the electrical fire monitor control panel. Technical Features 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 73mm 7. Rated operating current of main loop: less than 315A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 160mm×118mm×45mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 1kg

Manufactured by: Focus Security Microwave barrier develops an electromagnetic beam using high frequency microwaves that passes from a transmitter to a receiver, creating an invisible but sensitive protection wall. When the receiver detects a difference of condition within its beam, it begins a detailed analysis of the situation that, if considered a real intrusion, provides an alarm signal that can be treated in digital form. The difference of Microwave Barrier and infrared barrier is the protection area and environment endurance. On these two aspects, Microwave Barrier performs better than Infrared Barrier. Microwave Barrier can form a cubic protection space and not just a line. The space is about 2.5m *5m and can be adjustable. Microwave Barrier can be installed at wall or fence of military sites, air port, power plants where high security requirement is needed. MCB-150 is hard wired Focus brand Microwave Barrier. Below is the details: MW frequency:10.525GHz Detection distance:150m Central barrier area width:5m Central barrier area height:2.5m Grass width:0.3m Snow width:0.5m Power input:12～18 VDC Working current Transmitter：25～30mA，12VDC Receiver：30～35mA，12VDC Alarm Relay capacity:（N.C.）50mA,20VDC Alarm time:≤3s Tamper switch capacity:（N.C.）0.1A,20VDC Max emitting power:35mW（common）；50mW（Max） Detection speed:0.1～10m/s Alarm output:≥3s Temperature:-40℃～+65℃ Humidity:Max 98% Dimension:158×113×46mm Water-proof design Built-in water-proof equipment, anti-rain/snow 30mm/h A microwave barrier is one of the most reliable and safe intrusion detectors used for outdoor perimeter protection.

Manufactured by: Focus Security Microwave barrier develops an electromagnetic beam using high frequency microwaves that passes from a transmitter to a receiver, creating an invisible but sensitive protection wall. When the receiver detects a difference of condition within its beam, it begins a detailed analysis of the situation that, if considered a real intrusion, provides an alarm signal that can be treated in digital form. The difference of Microwave Barrier and infrared barrier is the protection area and environment endurance. On these two aspects, Microwave Barrier performs better than Infrared Barrier. Microwave Barrier can form a cubic protection space and not just a line. The space is about 2.5m *5m and can be adjustable. Microwave Barrier can be installed at wall or fence of military sites, air port, power plants where high security requirement is needed. MCB-150 is hard wired Focus brand Microwave Barrier. Below is the details: MW frequency:10.525GHz Detection distance:150m Central barrier area width:5m Central barrier area height:2.5m Grass width:0.3m Snow width:0.5m Power input:12～18 VDC Working current Transmitter：25～30mA，12VDC Receiver：30～35mA，12VDC Alarm Relay capacity:（N.C.）50mA,20VDC Alarm time:≤3s Tamper switch capacity:（N.C.）0.1A,20VDC Max emitting power:35mW（common）；50mW（Max） Detection speed:0.1～10m/s Alarm output:≥3s Temperature:-40℃～+65℃ Humidity:Max 98% Dimension:158×113×46mm Water-proof design Built-in water-proof equipment, anti-rain/snow 30mm/h A microwave barrier is one of the most reliable and safe intrusion detectors used for outdoor perimeter protection.

Manufactured by: Focus Security Microwave barrier develops an electromagnetic beam using high frequency microwaves that passes from a transmitter to a receiver, creating an invisible but sensitive protection wall. When the receiver detects a difference of condition within its beam, it begins a detailed analysis of the situation that, if considered a real intrusion, provides an alarm signal that can be treated in digital form. The difference of Microwave Barrier and infrared barrier is the protection area and environment endurance. On these two aspects, Microwave Barrier performs better than Infrared Barrier. Microwave Barrier can form a cubic protection space and not just a line. The space is about 2.5m *5m and can be adjustable. Microwave Barrier can be installed at wall or fence of military sites, air port, power plants where high security requirement is needed. MCB-150 is hard wired Focus brand Microwave Barrier. Below is the details: MW frequency:10.525GHz Detection distance:150m Central barrier area width:5m Central barrier area height:2.5m Grass width:0.3m Snow width:0.5m Power input:12～18 VDC Working current Transmitter：25～30mA，12VDC Receiver：30～35mA，12VDC Alarm Relay capacity:（N.C.）50mA,20VDC Alarm time:≤3s Tamper switch capacity:（N.C.）0.1A,20VDC Max emitting power:35mW（common）；50mW（Max） Detection speed:0.1～10m/s Alarm output:≥3s Temperature:-40℃～+65℃ Humidity:Max 98% Dimension:158×113×46mm Water-proof design Built-in water-proof equipment, anti-rain/snow 30mm/h A microwave barrier is one of the most reliable and safe intrusion detectors used for outdoor perimeter protection.

Wireless security sensor: MC-335R PIR detector Wireless Motion Sensor It is used for body movement detection in protected indoor area. Functions and Specification: 1.Anti-white light with spherical lens and sealed optical design. 2.Digital processing to ensure accurate and reliable alarm. 3. With built-in tamper switch and function of self-test and report. 4.Detection range: 9m (25℃) 5.Transmit range:120m-150m(open area) 6.Power supply:3VDC Lithium battery, battery life about 1 year(battery not included in the package) 7.Infrared coverage area:9m*12m/90° 8.Transmit frequency:433MHz 9.Alarm indication: LED light for several seconds. 10.Installation height:1.8 to 2.5m(6-8 inches) allow 45°angle against wall

Wireless security sensor: MC-335R PIR detector Wireless Motion Sensor It is used for body movement detection in protected indoor area. Functions and Specification: 1.Anti-white light with spherical lens and sealed optical design. 2.Digital processing to ensure accurate and reliable alarm. 3. With built-in tamper switch and function of self-test and report. 4.Detection range: 9m (25℃) 5.Transmit range:120m-150m(open area) 6.Power supply:3VDC Lithium battery, battery life about 1 year(battery not included in the package) 7.Infrared coverage area:9m*12m/90° 8.Transmit frequency:433MHz 9.Alarm indication: LED light for several seconds. 10.Installation height:1.8 to 2.5m(6-8 inches) allow 45°angle against wall

Wireless security sensor: MC-335R PIR detector Wireless Motion Sensor It is used for body movement detection in protected indoor area. Functions and Specification: 1.Anti-white light with spherical lens and sealed optical design. 2.Digital processing to ensure accurate and reliable alarm. 3. With built-in tamper switch and function of self-test and report. 4.Detection range: 9m (25℃) 5.Transmit range:120m-150m(open area) 6.Power supply:3VDC Lithium battery, battery life about 1 year(battery not included in the package) 7.Infrared coverage area:9m*12m/90° 8.Transmit frequency:433MHz 9.Alarm indication: LED light for several seconds. 10.Installation height:1.8 to 2.5m(6-8 inches) allow 45°angle against wall

Model：HA-8406 Introduction：Network Camera Support 32 IPCams to work IP Alarm system(ST-VGT, EAVS-2504) 32 Wireless Alarm Devices (door sensor, remotes, pir motion detectors......) All Alarm devices can bind each 32 IPCams to alarm. Users can recevie the alarming from app, auto recording the video from app after alarming. Freely to check all the alarming events recording, even from TF card. Product model: HA-8406 Operating system: embedded Linux User interface: IE browser, CMS client, mobile client Video format: main stream 1080P 20fps Substream 640*360 20fps Storage format: AVI Video compression format: H.265 Packing time: 15 minutes Network interface: Rj45，10M/100M adaptive network interface WIFI Configuration: Program on WEB IE, Program on Smartphone APP Memory interface: TF card, maximum support 128G Video agreement: Meian-private protocol, P2P protocol, Onvif protocol Image sensor: Crystal phase F22 200W (1980*1080) Mirror head: 3.6mm industrial lens Visible distance: within 8 meters Power supply: DC 12V/1A Power: Max 6W Measurement: Ф72*127.5mm(Include Antenna, exclude power supply/LAN cable) Weight: 315g Operating temperature：-5~55℃ Installation height: 2~5m Installation location: outdoor places, such as streets, playgrounds, etc.

Model：HA-8406 Introduction：Network Camera Support 32 IPCams to work IP Alarm system(ST-VGT, EAVS-2504) 32 Wireless Alarm Devices (door sensor, remotes, pir motion detectors......) All Alarm devices can bind each 32 IPCams to alarm. Users can recevie the alarming from app, auto recording the video from app after alarming. Freely to check all the alarming events recording, even from TF card. Product model: HA-8406 Operating system: embedded Linux User interface: IE browser, CMS client, mobile client Video format: main stream 1080P 20fps Substream 640*360 20fps Storage format: AVI Video compression format: H.265 Packing time: 15 minutes Network interface: Rj45，10M/100M adaptive network interface WIFI Configuration: Program on WEB IE, Program on Smartphone APP Memory interface: TF card, maximum support 128G Video agreement: Meian-private protocol, P2P protocol, Onvif protocol Image sensor: Crystal phase F22 200W (1980*1080) Mirror head: 3.6mm industrial lens Visible distance: within 8 meters Power supply: DC 12V/1A Power: Max 6W Measurement: Ф72*127.5mm(Include Antenna, exclude power supply/LAN cable) Weight: 315g Operating temperature：-5~55℃ Installation height: 2~5m Installation location: outdoor places, such as streets, playgrounds, etc.

Model：HA-8406 Introduction：Network Camera Support 32 IPCams to work IP Alarm system(ST-VGT, EAVS-2504) 32 Wireless Alarm Devices (door sensor, remotes, pir motion detectors......) All Alarm devices can bind each 32 IPCams to alarm. Users can recevie the alarming from app, auto recording the video from app after alarming. Freely to check all the alarming events recording, even from TF card. Product model: HA-8406 Operating system: embedded Linux User interface: IE browser, CMS client, mobile client Video format: main stream 1080P 20fps Substream 640*360 20fps Storage format: AVI Video compression format: H.265 Packing time: 15 minutes Network interface: Rj45，10M/100M adaptive network interface WIFI Configuration: Program on WEB IE, Program on Smartphone APP Memory interface: TF card, maximum support 128G Video agreement: Meian-private protocol, P2P protocol, Onvif protocol Image sensor: Crystal phase F22 200W (1980*1080) Mirror head: 3.6mm industrial lens Visible distance: within 8 meters Power supply: DC 12V/1A Power: Max 6W Measurement: Ф72*127.5mm(Include Antenna, exclude power supply/LAN cable) Weight: 315g Operating temperature：-5~55℃ Installation height: 2~5m Installation location: outdoor places, such as streets, playgrounds, etc.

IP and WIFI security camera outdoor detection alarm APP Monitoring device Video demo at Security Camera Resolution: 2MP(1920*1080) Compression mode: H.265 Storage: ≤128GSD card, cloud storage. Network interface: 10Mbps/100Mbps adaptive /RJ45 interface; Network protocol: TCP/IP, HTTP, etc. Support IP address: static IP address, dynamic IP address; Intelligent analysis: with human shape recognition, with early warning function. Voice function: support remote monitoring. Day and night mode: dual filters automatically switch IR-CUT day and night Support mobile APP video monitoring, and remote control. Alarm notification: FTP uploading pictures and videos, SMS alarm and other notification methods (Requires server cooperation) Support P2P/IE control/platform /Onvif protocol. Support wifi and audio configuration. IP 65 waterproof DC interface, 12V 1A power supply. Size: 112*86*132mm

IP and WIFI security camera outdoor detection alarm APP Monitoring device Video demo at Security Camera Resolution: 2MP(1920*1080) Compression mode: H.265 Storage: ≤128GSD card, cloud storage. Network interface: 10Mbps/100Mbps adaptive /RJ45 interface; Network protocol: TCP/IP, HTTP, etc. Support IP address: static IP address, dynamic IP address; Intelligent analysis: with human shape recognition, with early warning function. Voice function: support remote monitoring. Day and night mode: dual filters automatically switch IR-CUT day and night Support mobile APP video monitoring, and remote control. Alarm notification: FTP uploading pictures and videos, SMS alarm and other notification methods (Requires server cooperation) Support P2P/IE control/platform /Onvif protocol. Support wifi and audio configuration. IP 65 waterproof DC interface, 12V 1A power supply. Size: 112*86*132mm

IP and WIFI security camera outdoor detection alarm APP Monitoring device Video demo at Security Camera Resolution: 2MP(1920*1080) Compression mode: H.265 Storage: ≤128GSD card, cloud storage. Network interface: 10Mbps/100Mbps adaptive /RJ45 interface; Network protocol: TCP/IP, HTTP, etc. Support IP address: static IP address, dynamic IP address; Intelligent analysis: with human shape recognition, with early warning function. Voice function: support remote monitoring. Day and night mode: dual filters automatically switch IR-CUT day and night Support mobile APP video monitoring, and remote control. Alarm notification: FTP uploading pictures and videos, SMS alarm and other notification methods (Requires server cooperation) Support P2P/IE control/platform /Onvif protocol. Support wifi and audio configuration. IP 65 waterproof DC interface, 12V 1A power supply. Size: 112*86*132mm

Security Protection outdoor property, driveway, fence, forest perimeter security alarm system. Solar power wireless infrared detector. 8-20m (25-20 feet) at 15 degree detection range for protection of entrance, driveway, yard, forest. 8-10 years life time for battery. No wire and easy installation with IP66 waterproof and can work at extreme weather condition. Low power, fault alarm report. This product works as a sensor and need to work with same brand wireless compatible alarm panel to send alarm message. For example, HB-5050G can be used to receive alarm information with app remote monitoring. the outdoor motion sensor is waterproof(IP66),fully-enclosed design.the working temperature range is from -30 ℃ to 70℃ The sensor is powered by built-in rechargeable lithium ion battery which will be charged by the solar panel,so no need replace the battery.(PS. the sensor also can be powered by the DC5V-12V power adapter if the sensor be installed indoor or darkness areas) WIDE RANGE OF TRANSMISSION- the wireless range from the sensor to the alarm receiver is up to 1/4 mile(actual range will vary depending on the local terrain); the sensor range (detection distance) is up to 50 feet. (it has 3 sensitivities adjustable,Hi=50ft,Mid=30ft;Low=25ft)

Security Protection outdoor property, driveway, fence, forest perimeter security alarm system. Solar power wireless infrared detector. 8-20m (25-20 feet) at 15 degree detection range for protection of entrance, driveway, yard, forest. 8-10 years life time for battery. No wire and easy installation with IP66 waterproof and can work at extreme weather condition. Low power, fault alarm report. This product works as a sensor and need to work with same brand wireless compatible alarm panel to send alarm message. For example, HB-5050G can be used to receive alarm information with app remote monitoring. the outdoor motion sensor is waterproof(IP66),fully-enclosed design.the working temperature range is from -30 ℃ to 70℃ The sensor is powered by built-in rechargeable lithium ion battery which will be charged by the solar panel,so no need replace the battery.(PS. the sensor also can be powered by the DC5V-12V power adapter if the sensor be installed indoor or darkness areas) WIDE RANGE OF TRANSMISSION- the wireless range from the sensor to the alarm receiver is up to 1/4 mile(actual range will vary depending on the local terrain); the sensor range (detection distance) is up to 50 feet. (it has 3 sensitivities adjustable,Hi=50ft,Mid=30ft;Low=25ft)

Security Protection outdoor property, driveway, fence, forest perimeter security alarm system. Solar power wireless infrared detector. 8-20m (25-20 feet) at 15 degree detection range for protection of entrance, driveway, yard, forest. 8-10 years life time for battery. No wire and easy installation with IP66 waterproof and can work at extreme weather condition. Low power, fault alarm report. This product works as a sensor and need to work with same brand wireless compatible alarm panel to send alarm message. For example, HB-5050G can be used to receive alarm information with app remote monitoring. the outdoor motion sensor is waterproof(IP66),fully-enclosed design.the working temperature range is from -30 ℃ to 70℃ The sensor is powered by built-in rechargeable lithium ion battery which will be charged by the solar panel,so no need replace the battery.(PS. the sensor also can be powered by the DC5V-12V power adapter if the sensor be installed indoor or darkness areas) WIDE RANGE OF TRANSMISSION- the wireless range from the sensor to the alarm receiver is up to 1/4 mile(actual range will vary depending on the local terrain); the sensor range (detection distance) is up to 50 feet. (it has 3 sensitivities adjustable,Hi=50ft,Mid=30ft;Low=25ft)

Wireless PIR Intrusion Detector with PET immunity function With look down window to avoid blind-corner, Reliable Intrusion Detector Functions and Specification: 1.Reliable detection performance with dual PIR technology. 2.Digital micro processing and well designed fresnel lens for accurate and reliable intrusion sensing. 3.With strong detection sensitivity and pulse counting can be adjustable. 4.Anti interference of white light, RF etc. 5.Detection range: 12m (25℃) 6.Transmit range:120m-150m(open area) 7.Power supply:3VDC Lithium battery, battery life about 1 year(battery not included in the package) 8.Transmit frequency:433MHz 9.Installation height:1.8 to 2.5m(6-8 inches) allow 45°angle against wall 10.Dimension:136*60*48mm

Wireless PIR Intrusion Detector with PET immunity function With look down window to avoid blind-corner, Reliable Intrusion Detector Functions and Specification: 1.Reliable detection performance with dual PIR technology. 2.Digital micro processing and well designed fresnel lens for accurate and reliable intrusion sensing. 3.With strong detection sensitivity and pulse counting can be adjustable. 4.Anti interference of white light, RF etc. 5.Detection range: 12m (25℃) 6.Transmit range:120m-150m(open area) 7.Power supply:3VDC Lithium battery, battery life about 1 year(battery not included in the package) 8.Transmit frequency:433MHz 9.Installation height:1.8 to 2.5m(6-8 inches) allow 45°angle against wall 10.Dimension:136*60*48mm

Wireless PIR Intrusion Detector with PET immunity function With look down window to avoid blind-corner, Reliable Intrusion Detector Functions and Specification: 1.Reliable detection performance with dual PIR technology. 2.Digital micro processing and well designed fresnel lens for accurate and reliable intrusion sensing. 3.With strong detection sensitivity and pulse counting can be adjustable. 4.Anti interference of white light, RF etc. 5.Detection range: 12m (25℃) 6.Transmit range:120m-150m(open area) 7.Power supply:3VDC Lithium battery, battery life about 1 year(battery not included in the package) 8.Transmit frequency:433MHz 9.Installation height:1.8 to 2.5m(6-8 inches) allow 45°angle against wall 10.Dimension:136*60*48mm

Full two-way wireless communication, easy to install With a halo lighting effect A shift prompt alarm function Labyrinth inspection, very short two minutes inspection, low voltage remind Products using teardrop-type power technology, low power consumption Battery available for ten years Unique design, beautiful and durable Technical parameter: Temperature:-10℃-50℃ Relative humidity:＜97％RH Working power:DC9V Standby current:≤15uA Alarm current:≤35mA Alarm volume≥80dB(3metersA Weighting) Protection area:40m2 （According to specific site environment to determine） Transmission power:≥7dBm Shell :ABS Size: Size (mm): L:106 W:106 H:39

Full two-way wireless communication, easy to install With a halo lighting effect A shift prompt alarm function Labyrinth inspection, very short two minutes inspection, low voltage remind Products using teardrop-type power technology, low power consumption Battery available for ten years Unique design, beautiful and durable Technical parameter: Temperature:-10℃-50℃ Relative humidity:＜97％RH Working power:DC9V Standby current:≤15uA Alarm current:≤35mA Alarm volume≥80dB(3metersA Weighting) Protection area:40m2 （According to specific site environment to determine） Transmission power:≥7dBm Shell :ABS Size: Size (mm): L:106 W:106 H:39

Full two-way wireless communication, easy to install With a halo lighting effect A shift prompt alarm function Labyrinth inspection, very short two minutes inspection, low voltage remind Products using teardrop-type power technology, low power consumption Battery available for ten years Unique design, beautiful and durable Technical parameter: Temperature:-10℃-50℃ Relative humidity:＜97％RH Working power:DC9V Standby current:≤15uA Alarm current:≤35mA Alarm volume≥80dB(3metersA Weighting) Protection area:40m2 （According to specific site environment to determine） Transmission power:≥7dBm Shell :ABS Size: Size (mm): L:106 W:106 H:39

Various gas detection instrument KP826 4 in one gas detection alarm. It detects combustible gas, oxygen, H2S, CO 4 types gas density and alarm when the real time gas density exceed set value. The products have passed the explosion-proof certification. The shell is made of high strength anti-fall ABS flame retardant industrial material, It can be used in a variety of harsh environments. English display interface, display combustible gas, oxygen, hydrogen sulfide, carbon monoxide real-time concentration value. Sound, light, vibration triple alarm when the concentration exceeds the standard. Portable gas detector can also be equipped with an external pump Faster and more accurate response. It can store 3,000 alarm records. It can also connect to a computer, upload data in real time and store it on the computer. Using embedded microcomputer control, simple operation, complete functions. There are more products to choose from, detect single gas, or two in one, three in one and so on. Professional explosion-proof industrial gas detector, so that life and production safety is guaranteed. Specification: Sensor: electrochemical/catalytic type Battery: 3.7V 2000mAh lithium-ion rechargeable battery Operating time: 15 hours continuous operation for combustible gas detection and 20 hours continuous operation for toxic gas detection Display: English liquid crystal Alarm: Sound, light, vibration alarm Display error: ≤±3%FS Response time: T< 30s Charging time: ≤8h Measurement number: 2014C203-41 Explosion proof Certificate No. : CNEx17.4506 Size: 122mm*68mm*30mm Weight: 220g(with charger)

Various gas detection instrument KP826 4 in one gas detection alarm. It detects combustible gas, oxygen, H2S, CO 4 types gas density and alarm when the real time gas density exceed set value. The products have passed the explosion-proof certification. The shell is made of high strength anti-fall ABS flame retardant industrial material, It can be used in a variety of harsh environments. English display interface, display combustible gas, oxygen, hydrogen sulfide, carbon monoxide real-time concentration value. Sound, light, vibration triple alarm when the concentration exceeds the standard. Portable gas detector can also be equipped with an external pump Faster and more accurate response. It can store 3,000 alarm records. It can also connect to a computer, upload data in real time and store it on the computer. Using embedded microcomputer control, simple operation, complete functions. There are more products to choose from, detect single gas, or two in one, three in one and so on. Professional explosion-proof industrial gas detector, so that life and production safety is guaranteed. Specification: Sensor: electrochemical/catalytic type Battery: 3.7V 2000mAh lithium-ion rechargeable battery Operating time: 15 hours continuous operation for combustible gas detection and 20 hours continuous operation for toxic gas detection Display: English liquid crystal Alarm: Sound, light, vibration alarm Display error: ≤±3%FS Response time: T< 30s Charging time: ≤8h Measurement number: 2014C203-41 Explosion proof Certificate No. : CNEx17.4506 Size: 122mm*68mm*30mm Weight: 220g(with charger)

Various gas detection instrument KP826 4 in one gas detection alarm. It detects combustible gas, oxygen, H2S, CO 4 types gas density and alarm when the real time gas density exceed set value. The products have passed the explosion-proof certification. The shell is made of high strength anti-fall ABS flame retardant industrial material, It can be used in a variety of harsh environments. English display interface, display combustible gas, oxygen, hydrogen sulfide, carbon monoxide real-time concentration value. Sound, light, vibration triple alarm when the concentration exceeds the standard. Portable gas detector can also be equipped with an external pump Faster and more accurate response. It can store 3,000 alarm records. It can also connect to a computer, upload data in real time and store it on the computer. Using embedded microcomputer control, simple operation, complete functions. There are more products to choose from, detect single gas, or two in one, three in one and so on. Professional explosion-proof industrial gas detector, so that life and production safety is guaranteed. Specification: Sensor: electrochemical/catalytic type Battery: 3.7V 2000mAh lithium-ion rechargeable battery Operating time: 15 hours continuous operation for combustible gas detection and 20 hours continuous operation for toxic gas detection Display: English liquid crystal Alarm: Sound, light, vibration alarm Display error: ≤±3%FS Response time: T< 30s Charging time: ≤8h Measurement number: 2014C203-41 Explosion proof Certificate No. : CNEx17.4506 Size: 122mm*68mm*30mm Weight: 220g(with charger)

Monitor5.0 super version by Meian tech professional security alarm system manufacturer. It support both C/S and B/S two types client at the same time. One CMS can manage the whole country clients service. Independent management with partitions. With business function including charge recording, due charge remind. It supports SP short message sending. 4 grades management authority. Menus including: video preview, alarm inquiry, user management, business statistic, user logo, information management, clients Cost free of CMS for EAVS2506, FC-7664pro, All Focus brand meian technology manufactured security systems PC software management and monitoring.

Monitor5.0 super version by Meian tech professional security alarm system manufacturer. It support both C/S and B/S two types client at the same time. One CMS can manage the whole country clients service. Independent management with partitions. With business function including charge recording, due charge remind. It supports SP short message sending. 4 grades management authority. Menus including: video preview, alarm inquiry, user management, business statistic, user logo, information management, clients Cost free of CMS for EAVS2506, FC-7664pro, All Focus brand meian technology manufactured security systems PC software management and monitoring.

Monitor5.0 super version by Meian tech professional security alarm system manufacturer. It support both C/S and B/S two types client at the same time. One CMS can manage the whole country clients service. Independent management with partitions. With business function including charge recording, due charge remind. It supports SP short message sending. 4 grades management authority. Menus including: video preview, alarm inquiry, user management, business statistic, user logo, information management, clients Cost free of CMS for EAVS2506, FC-7664pro, All Focus brand meian technology manufactured security systems PC software management and monitoring.