All Products

Solar & Wireless Beam Sensor 8-beams perimeter security intrusion alert and wireless alarm for public building, community security, farm security. Note: The sensor has built-in speaking for on-site warning. But it should be used with wireless same brand alarm control panel or wireless to wired transceiver and other brand wired panel for alarm signal sending, fault report to security service monitor company or personal mobile phone. App monitor panel is available with Wifi or GSM network with model number HB-5050 Features: Battery Powered&Solar Charged,no need cables. Up to 100 meters easy detection range. 1 KM wireless transmission Range. Multiple Detection Beams(to avoid false alarm--such as falling leaves or birds). Automatic Shielding of the sunlight interference. No external cables and the antenna inside the shell,so will not be damaged by the lightening strike. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Anti-interference,Using FSK+FHSS wireless transmission technology. 4/6/8 Beam Sensor has on-site alarm function. Technical Parameters Infrared Detection Range 100m Wireless Transmission Range 1KM Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity Transmitter:500mAh Receiver: 500mAh Static Working Current ≤1mA Infrared Wavelength 940nm±20nm Solar Panel Output Current 1800Lux illumination level: HB-T001Q8≥8mA (Remarks: The outdoor illumination intensity on rainy days is about 2000Lux) Working Temperature Range -30℃~70℃ Weight HB-T001Q8：4.8kg HB-T001Q8：1090×84×45（mm）

Solar & Wireless Beam Sensor 8-beams perimeter security intrusion alert and wireless alarm for public building, community security, farm security. Note: The sensor has built-in speaking for on-site warning. But it should be used with wireless same brand alarm control panel or wireless to wired transceiver and other brand wired panel for alarm signal sending, fault report to security service monitor company or personal mobile phone. App monitor panel is available with Wifi or GSM network with model number HB-5050 Features: Battery Powered&Solar Charged,no need cables. Up to 100 meters easy detection range. 1 KM wireless transmission Range. Multiple Detection Beams(to avoid false alarm--such as falling leaves or birds). Automatic Shielding of the sunlight interference. No external cables and the antenna inside the shell,so will not be damaged by the lightening strike. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Anti-interference,Using FSK+FHSS wireless transmission technology. 4/6/8 Beam Sensor has on-site alarm function. Technical Parameters Infrared Detection Range 100m Wireless Transmission Range 1KM Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity Transmitter:500mAh Receiver: 500mAh Static Working Current ≤1mA Infrared Wavelength 940nm±20nm Solar Panel Output Current 1800Lux illumination level: HB-T001Q8≥8mA (Remarks: The outdoor illumination intensity on rainy days is about 2000Lux) Working Temperature Range -30℃~70℃ Weight HB-T001Q8：4.8kg HB-T001Q8：1090×84×45（mm）

Solar & Wireless Beam Sensor 8-beams perimeter security intrusion alert and wireless alarm for public building, community security, farm security. Note: The sensor has built-in speaking for on-site warning. But it should be used with wireless same brand alarm control panel or wireless to wired transceiver and other brand wired panel for alarm signal sending, fault report to security service monitor company or personal mobile phone. App monitor panel is available with Wifi or GSM network with model number HB-5050 Features: Battery Powered&Solar Charged,no need cables. Up to 100 meters easy detection range. 1 KM wireless transmission Range. Multiple Detection Beams(to avoid false alarm--such as falling leaves or birds). Automatic Shielding of the sunlight interference. No external cables and the antenna inside the shell,so will not be damaged by the lightening strike. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Anti-interference,Using FSK+FHSS wireless transmission technology. 4/6/8 Beam Sensor has on-site alarm function. Technical Parameters Infrared Detection Range 100m Wireless Transmission Range 1KM Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity Transmitter:500mAh Receiver: 500mAh Static Working Current ≤1mA Infrared Wavelength 940nm±20nm Solar Panel Output Current 1800Lux illumination level: HB-T001Q8≥8mA (Remarks: The outdoor illumination intensity on rainy days is about 2000Lux) Working Temperature Range -30℃~70℃ Weight HB-T001Q8：4.8kg HB-T001Q8：1090×84×45（mm）

Standard configuration of 2 loops addressable fire alarm control panel FW9000. ETL approval intelligent fire alarm control panel with good performance, flexible configuration and easy operation. Check information of alarm, fault and other operations is displayed by big LCD screen and can be printed by its built-in printer. The control panel supports 484 points two loops. If change installation, it can be extended to 64 loops. It can work with FW brand all types smoke detector, heat detector, manual call point, sounder strobes, modules and fireman's control panels to realize automatic fire alarm and control. Features: 1. The fire alarm panel has 2 loops in standard configuration and one loop can access 242 points. (FW devices). If the installation mode is changed, the extended loop can be extended to 64 loops and connected to 15488 detectors. 2. The panel has 6 sets of direct start buttons, which correspond to 6 sets of DC24V output and 6 sets of feedback access contacts, and 24 sets of addressable start buttons. 3. The panel is equipped with two DC12V battery backup to ensure the system can operate normally without AC power supply. 4. The panel have one RS-232 interface for PC panel configuration tool. It has two RS485 communication port for other external device. 5. The panel is connected to the computer through RS232, and the loop information and linkage information can equipment. 6. The panel has micro printer and can automatically print out fire alarm information, fault information etc. Specification: 1. Primary AC power supply: 220VAC 50/60Hz 2. Main supply output voltage (VDC): 27VDC &32VDC 3. Main supply output current: 2.5A at 27VDC, 3A at 32VDC 4. Minimum battery size 2*12V, DC12V/7Ah 5. Battery charging voltage (VDC): 27VDC 6. Battery charging current: 700mA 7. Sounder connector voltage output: 1Amp at 24VDC 8. DC24V connector voltage output: 1Amp at 24VDC 9. Fire feedback input end line resistor (Ohms): 10K 10. Fire feedback input contacts capacity: 2Amp at 24VDC 11. Printer: Built-in microwave printer 12. Computer interface: USB & RS232 13. Display: Graphical LCD 320*240 14. Operating humidity Range: 10%-93% relative humidity non-condensing. 15. Operating temperature: -10 to 50C 16. FACP dimension (L*W*D): 470mm*130mm*420mm 17. FACP net weight: 16.8kg

Standard configuration of 2 loops addressable fire alarm control panel FW9000. ETL approval intelligent fire alarm control panel with good performance, flexible configuration and easy operation. Check information of alarm, fault and other operations is displayed by big LCD screen and can be printed by its built-in printer. The control panel supports 484 points two loops. If change installation, it can be extended to 64 loops. It can work with FW brand all types smoke detector, heat detector, manual call point, sounder strobes, modules and fireman's control panels to realize automatic fire alarm and control. Features: 1. The fire alarm panel has 2 loops in standard configuration and one loop can access 242 points. (FW devices). If the installation mode is changed, the extended loop can be extended to 64 loops and connected to 15488 detectors. 2. The panel has 6 sets of direct start buttons, which correspond to 6 sets of DC24V output and 6 sets of feedback access contacts, and 24 sets of addressable start buttons. 3. The panel is equipped with two DC12V battery backup to ensure the system can operate normally without AC power supply. 4. The panel have one RS-232 interface for PC panel configuration tool. It has two RS485 communication port for other external device. 5. The panel is connected to the computer through RS232, and the loop information and linkage information can equipment. 6. The panel has micro printer and can automatically print out fire alarm information, fault information etc. Specification: 1. Primary AC power supply: 220VAC 50/60Hz 2. Main supply output voltage (VDC): 27VDC &32VDC 3. Main supply output current: 2.5A at 27VDC, 3A at 32VDC 4. Minimum battery size 2*12V, DC12V/7Ah 5. Battery charging voltage (VDC): 27VDC 6. Battery charging current: 700mA 7. Sounder connector voltage output: 1Amp at 24VDC 8. DC24V connector voltage output: 1Amp at 24VDC 9. Fire feedback input end line resistor (Ohms): 10K 10. Fire feedback input contacts capacity: 2Amp at 24VDC 11. Printer: Built-in microwave printer 12. Computer interface: USB & RS232 13. Display: Graphical LCD 320*240 14. Operating humidity Range: 10%-93% relative humidity non-condensing. 15. Operating temperature: -10 to 50C 16. FACP dimension (L*W*D): 470mm*130mm*420mm 17. FACP net weight: 16.8kg

Standard configuration of 2 loops addressable fire alarm control panel FW9000. ETL approval intelligent fire alarm control panel with good performance, flexible configuration and easy operation. Check information of alarm, fault and other operations is displayed by big LCD screen and can be printed by its built-in printer. The control panel supports 484 points two loops. If change installation, it can be extended to 64 loops. It can work with FW brand all types smoke detector, heat detector, manual call point, sounder strobes, modules and fireman's control panels to realize automatic fire alarm and control. Features: 1. The fire alarm panel has 2 loops in standard configuration and one loop can access 242 points. (FW devices). If the installation mode is changed, the extended loop can be extended to 64 loops and connected to 15488 detectors. 2. The panel has 6 sets of direct start buttons, which correspond to 6 sets of DC24V output and 6 sets of feedback access contacts, and 24 sets of addressable start buttons. 3. The panel is equipped with two DC12V battery backup to ensure the system can operate normally without AC power supply. 4. The panel have one RS-232 interface for PC panel configuration tool. It has two RS485 communication port for other external device. 5. The panel is connected to the computer through RS232, and the loop information and linkage information can equipment. 6. The panel has micro printer and can automatically print out fire alarm information, fault information etc. Specification: 1. Primary AC power supply: 220VAC 50/60Hz 2. Main supply output voltage (VDC): 27VDC &32VDC 3. Main supply output current: 2.5A at 27VDC, 3A at 32VDC 4. Minimum battery size 2*12V, DC12V/7Ah 5. Battery charging voltage (VDC): 27VDC 6. Battery charging current: 700mA 7. Sounder connector voltage output: 1Amp at 24VDC 8. DC24V connector voltage output: 1Amp at 24VDC 9. Fire feedback input end line resistor (Ohms): 10K 10. Fire feedback input contacts capacity: 2Amp at 24VDC 11. Printer: Built-in microwave printer 12. Computer interface: USB & RS232 13. Display: Graphical LCD 320*240 14. Operating humidity Range: 10%-93% relative humidity non-condensing. 15. Operating temperature: -10 to 50C 16. FACP dimension (L*W*D): 470mm*130mm*420mm 17. FACP net weight: 16.8kg

Addressable Fire Alarm Loop Isolator Module TCMK5210 Wiring type: Non-polar two bus Type: Isolator Action Current: 170mA/270mA Load Capcaity: Loop,24V,170mA/270mA (B, ZX2 short circuit) Mounting Hole Distance: 60mm Ingress Protection Rating: IP30 Specification: 86mm*86mm*40mm (with base) Approval: LPCB, CE, GOST

Addressable Fire Alarm Loop Isolator Module TCMK5210 Wiring type: Non-polar two bus Type: Isolator Action Current: 170mA/270mA Load Capcaity: Loop,24V,170mA/270mA (B, ZX2 short circuit) Mounting Hole Distance: 60mm Ingress Protection Rating: IP30 Specification: 86mm*86mm*40mm (with base) Approval: LPCB, CE, GOST

Addressable Fire Alarm Loop Isolator Module TCMK5210 Wiring type: Non-polar two bus Type: Isolator Action Current: 170mA/270mA Load Capcaity: Loop,24V,170mA/270mA (B, ZX2 short circuit) Mounting Hole Distance: 60mm Ingress Protection Rating: IP30 Specification: 86mm*86mm*40mm (with base) Approval: LPCB, CE, GOST

Back lit LED displaying all the information Display Capacity: Max 1024 pieces of scrolling information Simultaneous audible and visible alarming signals with the control panel MUTE, UP, DOWN and BROWSE operational keys are available

Back lit LED displaying all the information Display Capacity: Max 1024 pieces of scrolling information Simultaneous audible and visible alarming signals with the control panel MUTE, UP, DOWN and BROWSE operational keys are available

Back lit LED displaying all the information Display Capacity: Max 1024 pieces of scrolling information Simultaneous audible and visible alarming signals with the control panel MUTE, UP, DOWN and BROWSE operational keys are available

JT-TC518 Addressable Combustible Gas Detector of Measurement Range 0-100%LEL It adopts advanced semiconductor gas sensors using at room temperature and microprocessors in conjunction with precision temperature sensor, which can compensate for the drift of intelligent gas sensor. This detector can be wall-mounted and cabled easily. It is stable and don't need commission, with wide range of environmental adoption. JT-TC518 addressable detector is widely used in houses, hotels, apartments or other places that combustible gas may exist. This detector can monitor natural gas and other combustible gas containing methane. Features ● Equip with high-quality gas sensor, reliable and corresponding. ● The intelligent algorithm of the microprocessors can compensate for the drift of gas sensor. ● The precision temperature sensor is a supplement of the monitoring of the environment temperature, which completely eliminates false alarms. ● LEDs indicate the detector status of normal, alarm and fault. ● The shell of the detector use fire-resistant ABS engineering plastic, clean and generous. Technical Specifications 1) Operating power: DC 24V 2) Standby current: 21 mA 3) Alarming current: 28 mA 4) Ambient temperature: −10℃〜＋50℃ 5) Operating humidity: ≤95%RH 6) Sound level: ＞75dB 7) Pressure: 86kPa-106kPa 8) First stabilization period: 3 min 9) Expiration time of sensor: ＞5 years（in clean air） 10) Alarming threshold: methane: 8% LEL 11) Detecting gas: available to detect natural gas and many other kinds of combustible gas containing methane. 12) Output contact: active contact, available for one-way pulse solenoid valve of DC 12V; the drive capability of solenoid valve: 1000 μF capacity discharge 13) Encoding mode: addressable 14) Wiring: ①White plug: Connecting DC 12V solenoid valve ②Black line: Connecting DC 24V ③White line: Connecting the loop of control panel 15) Dimension: 120mmX86mmX48mm

JT-TC518 Addressable Combustible Gas Detector of Measurement Range 0-100%LEL It adopts advanced semiconductor gas sensors using at room temperature and microprocessors in conjunction with precision temperature sensor, which can compensate for the drift of intelligent gas sensor. This detector can be wall-mounted and cabled easily. It is stable and don't need commission, with wide range of environmental adoption. JT-TC518 addressable detector is widely used in houses, hotels, apartments or other places that combustible gas may exist. This detector can monitor natural gas and other combustible gas containing methane. Features ● Equip with high-quality gas sensor, reliable and corresponding. ● The intelligent algorithm of the microprocessors can compensate for the drift of gas sensor. ● The precision temperature sensor is a supplement of the monitoring of the environment temperature, which completely eliminates false alarms. ● LEDs indicate the detector status of normal, alarm and fault. ● The shell of the detector use fire-resistant ABS engineering plastic, clean and generous. Technical Specifications 1) Operating power: DC 24V 2) Standby current: 21 mA 3) Alarming current: 28 mA 4) Ambient temperature: −10℃〜＋50℃ 5) Operating humidity: ≤95%RH 6) Sound level: ＞75dB 7) Pressure: 86kPa-106kPa 8) First stabilization period: 3 min 9) Expiration time of sensor: ＞5 years（in clean air） 10) Alarming threshold: methane: 8% LEL 11) Detecting gas: available to detect natural gas and many other kinds of combustible gas containing methane. 12) Output contact: active contact, available for one-way pulse solenoid valve of DC 12V; the drive capability of solenoid valve: 1000 μF capacity discharge 13) Encoding mode: addressable 14) Wiring: ①White plug: Connecting DC 12V solenoid valve ②Black line: Connecting DC 24V ③White line: Connecting the loop of control panel 15) Dimension: 120mmX86mmX48mm

JT-TC518 Addressable Combustible Gas Detector of Measurement Range 0-100%LEL It adopts advanced semiconductor gas sensors using at room temperature and microprocessors in conjunction with precision temperature sensor, which can compensate for the drift of intelligent gas sensor. This detector can be wall-mounted and cabled easily. It is stable and don't need commission, with wide range of environmental adoption. JT-TC518 addressable detector is widely used in houses, hotels, apartments or other places that combustible gas may exist. This detector can monitor natural gas and other combustible gas containing methane. Features ● Equip with high-quality gas sensor, reliable and corresponding. ● The intelligent algorithm of the microprocessors can compensate for the drift of gas sensor. ● The precision temperature sensor is a supplement of the monitoring of the environment temperature, which completely eliminates false alarms. ● LEDs indicate the detector status of normal, alarm and fault. ● The shell of the detector use fire-resistant ABS engineering plastic, clean and generous. Technical Specifications 1) Operating power: DC 24V 2) Standby current: 21 mA 3) Alarming current: 28 mA 4) Ambient temperature: −10℃〜＋50℃ 5) Operating humidity: ≤95%RH 6) Sound level: ＞75dB 7) Pressure: 86kPa-106kPa 8) First stabilization period: 3 min 9) Expiration time of sensor: ＞5 years（in clean air） 10) Alarming threshold: methane: 8% LEL 11) Detecting gas: available to detect natural gas and many other kinds of combustible gas containing methane. 12) Output contact: active contact, available for one-way pulse solenoid valve of DC 12V; the drive capability of solenoid valve: 1000 μF capacity discharge 13) Encoding mode: addressable 14) Wiring: ①White plug: Connecting DC 12V solenoid valve ②Black line: Connecting DC 24V ③White line: Connecting the loop of control panel 15) Dimension: 120mmX86mmX48mm

Works with TC series addressable fire alarm system Intelligent heat detector Advanced single-chip microcomputer technology Non-polarized two-wire Indoor garage, kitchen, boiler room, generator room, drying room and other places Approval: LPCB（EN54-5） CE Technical Specifications Operating voltage Loop 24V(18.5V～26V) Operating current Standby current: ≤0.3mA; Alarm current: ≤0.8mA Operating Environment Temperature: -10°C～+50°C; Relative Humidity: ≤95%, non-condensing Indicator Red,Flashes when polling,Illuminates in alarm Ingress protection rating IP33 Material and color of enclosure ABS; Milky white Coding method Electronically coding Code range 1～255 Weight About 110g Mounting hole distance 60mm Dimension 100mm×50mm (with base)

Works with TC series addressable fire alarm system Intelligent heat detector Advanced single-chip microcomputer technology Non-polarized two-wire Indoor garage, kitchen, boiler room, generator room, drying room and other places Approval: LPCB（EN54-5） CE Technical Specifications Operating voltage Loop 24V(18.5V～26V) Operating current Standby current: ≤0.3mA; Alarm current: ≤0.8mA Operating Environment Temperature: -10°C～+50°C; Relative Humidity: ≤95%, non-condensing Indicator Red,Flashes when polling,Illuminates in alarm Ingress protection rating IP33 Material and color of enclosure ABS; Milky white Coding method Electronically coding Code range 1～255 Weight About 110g Mounting hole distance 60mm Dimension 100mm×50mm (with base)

Works with TC series addressable fire alarm system Intelligent heat detector Advanced single-chip microcomputer technology Non-polarized two-wire Indoor garage, kitchen, boiler room, generator room, drying room and other places Approval: LPCB（EN54-5） CE Technical Specifications Operating voltage Loop 24V(18.5V～26V) Operating current Standby current: ≤0.3mA; Alarm current: ≤0.8mA Operating Environment Temperature: -10°C～+50°C; Relative Humidity: ≤95%, non-condensing Indicator Red,Flashes when polling,Illuminates in alarm Ingress protection rating IP33 Material and color of enclosure ABS; Milky white Coding method Electronically coding Code range 1～255 Weight About 110g Mounting hole distance 60mm Dimension 100mm×50mm (with base)

TCMK5265 Addressable I/O Module non-polarized two bus,ultra-low power consumption,no need to add DC24V power supply passive outputvv input and output have isolating loop to effectively filter out external interference 1.Fix the base with two tapping screws,and then connect loop to terminals(polarity-insensitive).After thebase is fixed firmly,rotate the bottom of detector and base clockwise,and then the detector will be fitted tothe base. 2.Wiring instructions:RVS twisted pair with cross-sectional area≥1.0mm2 should be selected for the secondbus of the detector,which should be laid through metal pipe or flame retardant pipe.The length of theconnecting wire should be limited to the single bus resistance≤20Q,otherwise the wire diameter should beincreased. Rated operating voltage Loop:24V(14V~28V); Operating current Monitoring current: ≤ 0.2mA start current: ≤ 0.5mA Operating Environment Temperature:-10℃~+55℃; Relative Humidity:≤95% non-condensing Input supervisory external loop Open circuit occurs when normally open terminal supervising externalloop (short circuit is an action signal), the module will send a fault signalto the control panel. Material and color ABS;Porcelain white Output supervisory external loop Short circuit or open circuit on the output loop occurs, the module will send a fault signal to the contaol panel Weight 147g Mounting hole distance 60mm Dimension(L×W×H) 86mm×38mm×86mm(with base)

TCMK5265 Addressable I/O Module non-polarized two bus,ultra-low power consumption,no need to add DC24V power supply passive outputvv input and output have isolating loop to effectively filter out external interference 1.Fix the base with two tapping screws,and then connect loop to terminals(polarity-insensitive).After thebase is fixed firmly,rotate the bottom of detector and base clockwise,and then the detector will be fitted tothe base. 2.Wiring instructions:RVS twisted pair with cross-sectional area≥1.0mm2 should be selected for the secondbus of the detector,which should be laid through metal pipe or flame retardant pipe.The length of theconnecting wire should be limited to the single bus resistance≤20Q,otherwise the wire diameter should beincreased. Rated operating voltage Loop:24V(14V~28V); Operating current Monitoring current: ≤ 0.2mA start current: ≤ 0.5mA Operating Environment Temperature:-10℃~+55℃; Relative Humidity:≤95% non-condensing Input supervisory external loop Open circuit occurs when normally open terminal supervising externalloop (short circuit is an action signal), the module will send a fault signalto the control panel. Material and color ABS;Porcelain white Output supervisory external loop Short circuit or open circuit on the output loop occurs, the module will send a fault signal to the contaol panel Weight 147g Mounting hole distance 60mm Dimension(L×W×H) 86mm×38mm×86mm(with base)

TCMK5265 Addressable I/O Module non-polarized two bus,ultra-low power consumption,no need to add DC24V power supply passive outputvv input and output have isolating loop to effectively filter out external interference 1.Fix the base with two tapping screws,and then connect loop to terminals(polarity-insensitive).After thebase is fixed firmly,rotate the bottom of detector and base clockwise,and then the detector will be fitted tothe base. 2.Wiring instructions:RVS twisted pair with cross-sectional area≥1.0mm2 should be selected for the secondbus of the detector,which should be laid through metal pipe or flame retardant pipe.The length of theconnecting wire should be limited to the single bus resistance≤20Q,otherwise the wire diameter should beincreased. Rated operating voltage Loop:24V(14V~28V); Operating current Monitoring current: ≤ 0.2mA start current: ≤ 0.5mA Operating Environment Temperature:-10℃~+55℃; Relative Humidity:≤95% non-condensing Input supervisory external loop Open circuit occurs when normally open terminal supervising externalloop (short circuit is an action signal), the module will send a fault signalto the control panel. Material and color ABS;Porcelain white Output supervisory external loop Short circuit or open circuit on the output loop occurs, the module will send a fault signal to the contaol panel Weight 147g Mounting hole distance 60mm Dimension(L×W×H) 86mm×38mm×86mm(with base)

TX7201 Addressable Zone Monitor unit is an addressable interface module, which will integrate conventional detectors or conventional manual call points to addressable system. When any of the connected devices alarms are active, the unit can send the alarm message to fire alarm controller, which generates alarm signal and displays its address. The unit can match with the conventional optical smoke detector, conventional rate of rise and fixed temperature detector and conventional manual call point etc. It has the function of checking short or open circuit of the output connection, by the End of Line Resistor (EOLR). The fault massage includes open circuit, short circuit or any removal of the detectors.

TX7201 Addressable Zone Monitor unit is an addressable interface module, which will integrate conventional detectors or conventional manual call points to addressable system. When any of the connected devices alarms are active, the unit can send the alarm message to fire alarm controller, which generates alarm signal and displays its address. The unit can match with the conventional optical smoke detector, conventional rate of rise and fixed temperature detector and conventional manual call point etc. It has the function of checking short or open circuit of the output connection, by the End of Line Resistor (EOLR). The fault massage includes open circuit, short circuit or any removal of the detectors.

TX7201 Addressable Zone Monitor unit is an addressable interface module, which will integrate conventional detectors or conventional manual call points to addressable system. When any of the connected devices alarms are active, the unit can send the alarm message to fire alarm controller, which generates alarm signal and displays its address. The unit can match with the conventional optical smoke detector, conventional rate of rise and fixed temperature detector and conventional manual call point etc. It has the function of checking short or open circuit of the output connection, by the End of Line Resistor (EOLR). The fault massage includes open circuit, short circuit or any removal of the detectors.

JDJL-2 explosion-proof fire alarm bell (abbreviated as alarm bell) is a non-coding alarm bell. It is suitable for installing in explosive gas environment with T6 temperature group of level II C (or II B). When an accident or fire occurs at the production site, the control signal sent by the fire alarm controller starts the alarm circuit and sends out sound alarm signal to complete the purpose of alarm. This product can also be used with manual alarm buttons to achieve simple sound alarm purposes. The alarm bell can be used in conjunction with the fire alarm controller of any manufacturer. The alarm bell has reasonable structure, beautiful appearance, reliable performance and convenient installation. It is a fire alarm device with high reliability and strong anti-interference ability. This product meets the requirements of GB3836.1-2000 "Electrical equipment for explosive gas environment Part 1: General requirements", "GB3836.2-2000", "Electrical equipment for explosive gas environment Part 2: Flameproof"d";". The inspection unit designated by the state has passed the inspection and obtained the explosion-proof qualification certificate. Installation: M6 screw is used to fix the alarm bell on the wall through the installation claw of the alarm bell (the inlet must be facing up). Cable introduction device: The sealing nut is used to press the sealing ring structure tightly. It can be widely used in petrochemical industry, oil fields, oil depots and liquids, gas station, coal mine, environmental protection and other departments.

JDJL-2 explosion-proof fire alarm bell (abbreviated as alarm bell) is a non-coding alarm bell. It is suitable for installing in explosive gas environment with T6 temperature group of level II C (or II B). When an accident or fire occurs at the production site, the control signal sent by the fire alarm controller starts the alarm circuit and sends out sound alarm signal to complete the purpose of alarm. This product can also be used with manual alarm buttons to achieve simple sound alarm purposes. The alarm bell can be used in conjunction with the fire alarm controller of any manufacturer. The alarm bell has reasonable structure, beautiful appearance, reliable performance and convenient installation. It is a fire alarm device with high reliability and strong anti-interference ability. This product meets the requirements of GB3836.1-2000 "Electrical equipment for explosive gas environment Part 1: General requirements", "GB3836.2-2000", "Electrical equipment for explosive gas environment Part 2: Flameproof"d";". The inspection unit designated by the state has passed the inspection and obtained the explosion-proof qualification certificate. Installation: M6 screw is used to fix the alarm bell on the wall through the installation claw of the alarm bell (the inlet must be facing up). Cable introduction device: The sealing nut is used to press the sealing ring structure tightly. It can be widely used in petrochemical industry, oil fields, oil depots and liquids, gas station, coal mine, environmental protection and other departments.

JDJL-2 explosion-proof fire alarm bell (abbreviated as alarm bell) is a non-coding alarm bell. It is suitable for installing in explosive gas environment with T6 temperature group of level II C (or II B). When an accident or fire occurs at the production site, the control signal sent by the fire alarm controller starts the alarm circuit and sends out sound alarm signal to complete the purpose of alarm. This product can also be used with manual alarm buttons to achieve simple sound alarm purposes. The alarm bell can be used in conjunction with the fire alarm controller of any manufacturer. The alarm bell has reasonable structure, beautiful appearance, reliable performance and convenient installation. It is a fire alarm device with high reliability and strong anti-interference ability. This product meets the requirements of GB3836.1-2000 "Electrical equipment for explosive gas environment Part 1: General requirements", "GB3836.2-2000", "Electrical equipment for explosive gas environment Part 2: Flameproof"d";". The inspection unit designated by the state has passed the inspection and obtained the explosion-proof qualification certificate. Installation: M6 screw is used to fix the alarm bell on the wall through the installation claw of the alarm bell (the inlet must be facing up). Cable introduction device: The sealing nut is used to press the sealing ring structure tightly. It can be widely used in petrochemical industry, oil fields, oil depots and liquids, gas station, coal mine, environmental protection and other departments.

HB-G250 HB brand solar power beam alarm panel compatible TCP/IP communication module. It is used for HB-G250 for RJ45 network communication. With this module, the HB-G250 can send alarm via TCP/IP network and app remote monitor is available. HB-WT-1 is optional alarm accessory for engineer alarm panel HB-G250 The size is small (142×92×25mm) and can be put inside the alarm panel. It is powered by alarm panel and connect to TCP/IP internet with RJ45 cable. Then the alarm event will be reported to security center or monitor mobile via TCP/IP network.And the security center can control the alarm panel via this TCP/IP communication module. Functions: 1. Remote control the alarm panel and receive alarm information via HB-WT-1 communicaton module. 2. User can use virtual keypad to remote alarm panel. 3. User can remote program the alarm panel. 4. User can inquiry arm/ disarm, bypass etc. alarm status and system information. 5. With alarm center management software CMS to monitor the alarm panel. 6. Authorize alarm panel operation. 7. Further development of the alarm system via SDK kit. Specification: Votage: DC12V-14V Working temperature:-40℃～60℃ Dimension: 142×92×25（mm） More solar power perimeter security equipment please check HB brand all wireless compatible solar beam, solar detector, solar motion sensor, smoke detector, gas sensor. All the products are professional security devices for both residential security, commercial security and industry security. Solar power perimeter security equipment is innovated for outdoor property security protection such as farm, pool, garden.

HB-G250 HB brand solar power beam alarm panel compatible TCP/IP communication module. It is used for HB-G250 for RJ45 network communication. With this module, the HB-G250 can send alarm via TCP/IP network and app remote monitor is available. HB-WT-1 is optional alarm accessory for engineer alarm panel HB-G250 The size is small (142×92×25mm) and can be put inside the alarm panel. It is powered by alarm panel and connect to TCP/IP internet with RJ45 cable. Then the alarm event will be reported to security center or monitor mobile via TCP/IP network.And the security center can control the alarm panel via this TCP/IP communication module. Functions: 1. Remote control the alarm panel and receive alarm information via HB-WT-1 communicaton module. 2. User can use virtual keypad to remote alarm panel. 3. User can remote program the alarm panel. 4. User can inquiry arm/ disarm, bypass etc. alarm status and system information. 5. With alarm center management software CMS to monitor the alarm panel. 6. Authorize alarm panel operation. 7. Further development of the alarm system via SDK kit. Specification: Votage: DC12V-14V Working temperature:-40℃～60℃ Dimension: 142×92×25（mm） More solar power perimeter security equipment please check HB brand all wireless compatible solar beam, solar detector, solar motion sensor, smoke detector, gas sensor. All the products are professional security devices for both residential security, commercial security and industry security. Solar power perimeter security equipment is innovated for outdoor property security protection such as farm, pool, garden.

HB-G250 HB brand solar power beam alarm panel compatible TCP/IP communication module. It is used for HB-G250 for RJ45 network communication. With this module, the HB-G250 can send alarm via TCP/IP network and app remote monitor is available. HB-WT-1 is optional alarm accessory for engineer alarm panel HB-G250 The size is small (142×92×25mm) and can be put inside the alarm panel. It is powered by alarm panel and connect to TCP/IP internet with RJ45 cable. Then the alarm event will be reported to security center or monitor mobile via TCP/IP network.And the security center can control the alarm panel via this TCP/IP communication module. Functions: 1. Remote control the alarm panel and receive alarm information via HB-WT-1 communicaton module. 2. User can use virtual keypad to remote alarm panel. 3. User can remote program the alarm panel. 4. User can inquiry arm/ disarm, bypass etc. alarm status and system information. 5. With alarm center management software CMS to monitor the alarm panel. 6. Authorize alarm panel operation. 7. Further development of the alarm system via SDK kit. Specification: Votage: DC12V-14V Working temperature:-40℃～60℃ Dimension: 142×92×25（mm） More solar power perimeter security equipment please check HB brand all wireless compatible solar beam, solar detector, solar motion sensor, smoke detector, gas sensor. All the products are professional security devices for both residential security, commercial security and industry security. Solar power perimeter security equipment is innovated for outdoor property security protection such as farm, pool, garden.

Integrated security all-in-one alarm device. This alarm host has built-in NVR and free CMS, PC software and APP. 4G module, TCP/IP and WIFI network. Video demo can refer to EAVS-2506 at Video Alarm Video Features: Video access: 4*IPC1080P Synchronous playback: 4*IPC1080P Compression mode: H.265 Video output: HDMI, VGA, IVDEO output. Transmission mode: Support WIFI relay forwarding function. System performance: preview/video/playback/backup/network monitoring. Double identification of mobile image alarm and probe space intrusion alarm. Support mobile phone APP video surveillance, as well as pan-tilt and home appliances control. Support P2P/IE control/platform /Onvif protocol. Support wifi connection (Meian WIFI camera only). Support routing function (only router 4G version support). Alarm function: System capacity: 32 single bus +96 wireless devices (including intelligent electrical control) Fortification mode: overall layout, 8-zone layout, independent layout layout. GSM communication: SMS withdrawal, GPRS network communication. 4G communication: support video upload, 4G two-way communication, network remote operation control (only 4G version supports this function). IP communication: IE programming, remote upgrade, remote control, alarm networking. Unique features: voice prompt, two-way intercom, on-site monitoring, timing cloth withdrawal. Extended function: relay linkage, programmable output Note: Only alarm host included. If you need camera and sensors, please add or contact us.

Integrated security all-in-one alarm device. This alarm host has built-in NVR and free CMS, PC software and APP. 4G module, TCP/IP and WIFI network. Video demo can refer to EAVS-2506 at Video Alarm Video Features: Video access: 4*IPC1080P Synchronous playback: 4*IPC1080P Compression mode: H.265 Video output: HDMI, VGA, IVDEO output. Transmission mode: Support WIFI relay forwarding function. System performance: preview/video/playback/backup/network monitoring. Double identification of mobile image alarm and probe space intrusion alarm. Support mobile phone APP video surveillance, as well as pan-tilt and home appliances control. Support P2P/IE control/platform /Onvif protocol. Support wifi connection (Meian WIFI camera only). Support routing function (only router 4G version support). Alarm function: System capacity: 32 single bus +96 wireless devices (including intelligent electrical control) Fortification mode: overall layout, 8-zone layout, independent layout layout. GSM communication: SMS withdrawal, GPRS network communication. 4G communication: support video upload, 4G two-way communication, network remote operation control (only 4G version supports this function). IP communication: IE programming, remote upgrade, remote control, alarm networking. Unique features: voice prompt, two-way intercom, on-site monitoring, timing cloth withdrawal. Extended function: relay linkage, programmable output Note: Only alarm host included. If you need camera and sensors, please add or contact us.

Integrated security all-in-one alarm device. This alarm host has built-in NVR and free CMS, PC software and APP. 4G module, TCP/IP and WIFI network. Video demo can refer to EAVS-2506 at Video Alarm Video Features: Video access: 4*IPC1080P Synchronous playback: 4*IPC1080P Compression mode: H.265 Video output: HDMI, VGA, IVDEO output. Transmission mode: Support WIFI relay forwarding function. System performance: preview/video/playback/backup/network monitoring. Double identification of mobile image alarm and probe space intrusion alarm. Support mobile phone APP video surveillance, as well as pan-tilt and home appliances control. Support P2P/IE control/platform /Onvif protocol. Support wifi connection (Meian WIFI camera only). Support routing function (only router 4G version support). Alarm function: System capacity: 32 single bus +96 wireless devices (including intelligent electrical control) Fortification mode: overall layout, 8-zone layout, independent layout layout. GSM communication: SMS withdrawal, GPRS network communication. 4G communication: support video upload, 4G two-way communication, network remote operation control (only 4G version supports this function). IP communication: IE programming, remote upgrade, remote control, alarm networking. Unique features: voice prompt, two-way intercom, on-site monitoring, timing cloth withdrawal. Extended function: relay linkage, programmable output Note: Only alarm host included. If you need camera and sensors, please add or contact us.

Residual Current Electrical Fire Monitoring Detector TC-DH01B-J225 Through-line aperture: 225 × 56mm main circuit rated operating current: less than 630A Dimensions: 296mm × 166mm × 45mm Standard: GB14287.2-2014 "Electric Fire Monitoring Systems - Part 2: Residual Current Electric Fire Detectors” The Detector builds up an electrical fire monitoring system with our productions of JB-DH-TC5600 Electrical Fire Monitoring Equipment, TC-DH12A Combined Electrical Fire Monitoring Detector and TC-DH230 Combined Electrical Fire Monitoring Detector. The Detector can realize the function of leakage test, temperature test and output controlling by connecting with JB-DH-TC5600 Electrical Fire Monitoring Equipment through two-line loops. It can also connect with many other kinds of residual current transformers to realize stable and reliable operating. Electrical fire monitoring system can effectively prevent electrical fires and reduce losses. Technical Specifications: 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 225mm×56mm 7. Rated operating current of main loop: less than 630A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 296mm×166mm×45mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 3kg

Residual Current Electrical Fire Monitoring Detector TC-DH01B-J225 Through-line aperture: 225 × 56mm main circuit rated operating current: less than 630A Dimensions: 296mm × 166mm × 45mm Standard: GB14287.2-2014 "Electric Fire Monitoring Systems - Part 2: Residual Current Electric Fire Detectors” The Detector builds up an electrical fire monitoring system with our productions of JB-DH-TC5600 Electrical Fire Monitoring Equipment, TC-DH12A Combined Electrical Fire Monitoring Detector and TC-DH230 Combined Electrical Fire Monitoring Detector. The Detector can realize the function of leakage test, temperature test and output controlling by connecting with JB-DH-TC5600 Electrical Fire Monitoring Equipment through two-line loops. It can also connect with many other kinds of residual current transformers to realize stable and reliable operating. Electrical fire monitoring system can effectively prevent electrical fires and reduce losses. Technical Specifications: 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 225mm×56mm 7. Rated operating current of main loop: less than 630A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 296mm×166mm×45mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 3kg

Residual Current Electrical Fire Monitoring Detector TC-DH01B-J225 Through-line aperture: 225 × 56mm main circuit rated operating current: less than 630A Dimensions: 296mm × 166mm × 45mm Standard: GB14287.2-2014 "Electric Fire Monitoring Systems - Part 2: Residual Current Electric Fire Detectors” The Detector builds up an electrical fire monitoring system with our productions of JB-DH-TC5600 Electrical Fire Monitoring Equipment, TC-DH12A Combined Electrical Fire Monitoring Detector and TC-DH230 Combined Electrical Fire Monitoring Detector. The Detector can realize the function of leakage test, temperature test and output controlling by connecting with JB-DH-TC5600 Electrical Fire Monitoring Equipment through two-line loops. It can also connect with many other kinds of residual current transformers to realize stable and reliable operating. Electrical fire monitoring system can effectively prevent electrical fires and reduce losses. Technical Specifications: 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 225mm×56mm 7. Rated operating current of main loop: less than 630A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 296mm×166mm×45mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 3kg