Perimeter Security Equipment

Perimeter Security Equipment Photoelectric beam system, Electric Fencing, Sensing cable, Fiber vibration sensing alarm. Perimeter Security Solutions for farm, garden, fishing pool, livestock application.

GRID

LIST

Wireless infrared beam security system 4-beams

4-beams solar power wireless alarm intrusion security system. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. 4 beams 100m infrared detection distance New wireless beams detector easy perimeter security equipment installation and no interference. Self-contained solar powered motion sensor alarm with sound. Built-in speaker and sound can be set as 5-60s or mute. Loud sound of 60dB. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is 4 beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 4 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:590*84*45mm 17.Distance between infrared light hole: 35mm

$99.00

Add to Cart

3-beams perimeter security break-in wireless alarm system

Solar powered wireless infrared break beam system 3-beams photoelectric intruder alarm 3-beams transmitter and receiver break alarm system consist as a light wall to block intruders outside. It is used for wall, fence, yard intrusion prevention. Solar power wireless beam is innovated perimeter system for easy installation and maintence. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is three beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 3 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) How to choose active infrared beams There are different beams quantity such as 2 beams, 3 beams, 4 beams, 6 beams and 8 beams of photoelectric beam sensor. So, how many beams should I choose? The more beams means higher of protection height and longer of detection distance. For example, if the distance between two infrared holes is 35mm, then, for 3 beams sensor, the protection height is 70mm. For 4 beams sensor, any two neighbor beams are blocked, it will trigger alarm. Same for 6 beams or 8 beams sensor. So more beams will be with more security such as for bank. More beams means more power of infrared beam transmission and with stronger penetration to against interference of fog, sunshine etc. And what does the infrared detection distance mean? It means the distance between the transmission terminal and receiving terminal. The actual installation distance should be less than 80% of the specified distance. For example, the specified detection distance is 100m, then the actual installation detection distance should be less than 80m. If no interference, the detection can reach to 6 times of specified distance. (6*100=600m). But environment interference should be considered for using. There are some rules for active infrared beam installation. For example, if the beam sensor is installed on a low wall, the distance between the top of the wall and the lowest infrared hole should be around 150mm. Because the size of a normal person is 500mm(width)*200mm(thickness), that will avoid intrusion of people from bottom side of the beam sensor and false alarm triggered by small animals. HB solar power infrared beam system can be easy calibrated. 1. Make sure that the eye can see the other end through the mechanical calibration hole at one end. 2. Ensure that the LCD displayed figures are large and stable.

$81.00

Add to Cart

Break beam solar power wireless 6-beam perimeter intrusion alarm

6-beams solar power wireless alarm intrusion security system. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. 6 beams 100m infrared detection distance New wireless beams detector easy perimeter security equipment installation and no interference. Self-contained solar powered motion sensor alarm with sound. Built-in speaker and sound can be set as 5-60s or mute. Loud sound of 60dB. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is six beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 6 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:840*84*45mm 17.Distance between infrared light hole: 35mm

$123.50

Add to Cart

Garden Light & Wireless Security IR Detector Solar Power

Fences, gardens, swimming pools, golf courses etc. outdoor property large open land security equipment. Solar power LED light with wireless photoelectric beam sensor for intrusion detection and alarm. The garden light LED will light on automatically at night and light off at day time. The LED light can continue work for about 5 days at cloudy days or rainy days. The 8-beams photoelectric IR detector inside the garden light pole works 24 hours to keep illegal intrusion outside. If there is intrusion entering into the blocked area, it will trigger sound alarm and send wireless alarm signal to remote receiver. Solar-Power garden light wall is ideal security equipment and lighting device for garden, golf courses, swimming pools. The solar panel will charge the IR beam firstly, then charge the garden LED light. It can work for about 10 years of battery life time. If change battery, it can continue working. Technical Parameters Infrared Detection Range 50m Wireless Transmission Range 700m Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity 6000mAh LED Power Consumption 1 W Infrared Wavelength 940nm±20nm Solar Panel Power Capability 2W Working Duration Solar charged for 8-12hours, Garden light can work 20hours continuously Barriers can work normally all the time no matter for rainy day or sunny days ) Working Temperature Range -30℃~70℃ Weight 17kg HB-T002A8：4.3kg Dimension 1400×φ150（mm） Solar&Wireless 8 Beam Barrier+Garden light Features: Battery Powered&Solar Charged,no need cables. Garden Lights turn on automatically at night and turn off automatically at day time. Multiple Detection Beams(to avoid false alarm--such as small pets). Dual direction is viable. Up to 50 meters easy detection range. 700 KM wireless transmission Range. (Need to buy same brand wireless alarm panel or receiver) Automatic Shielding of the sunlight interference. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Package: Each pair garden light wall will be packed into 3 packages, one for one pair garden light pole (with 8-beam photoelectric infrared detector inside), one for one pair LED lamp, one for base station. So, packing weight is 26kgs (much more than real weight) We can ship by sea or by air to air port if you can handle the import process at your side. Feel free to contact us.

$370.00

Add to Cart