Infrared Beam 2-beams break alarm solar power wireless security

Courtyard, school, villa perimeter security equipment easy installing and maintence. 2 beams outdoor intruder alarm wireless communication remote monitor system.
This is 2 beams with transmitter and receiver terminals as a pair to create light wall to block illegal invasion to private place.
It can work with HB-5050G etc. with app monitor.
It can be easy installed without any wiring. And with high security grade with self check and report of low battery, moving or any fault.

Functions and Specification:
1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux.
2.It is 2 beams wireless outdoor infrared detectors working by pairs of transmitter and receiver.
3.Irradiation distance:60m
4.Wireless transmitting distance:800m
5.Wireless frequency:433MHz
6.Maximum alarm times in 24 hours:<=50 times
7.Infrared light beam number: 2 beams
8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh
9.Working temperature: -30℃~70℃
10.Working voltage:3.3V
11.Power storage type: LiFePO4 Battery
12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA
13.Infrared light frequency: secondary modulation & encoding based on 38KHz
14.Infrared light wave-length: 940nm+/-20nm
15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux)
16.Dimension:265*84*45mm
17.Distance between infrared light hole: 35mm