HB solar beam

GRID

LIST

3-beams perimeter security break-in wireless alarm system

Solar powered wireless infrared break beam system 3-beams photoelectric intruder alarm 3-beams transmitter and receiver break alarm system consist as a light wall to block intruders outside. It is used for wall, fence, yard intrusion prevention. Solar power wireless beam is innovated perimeter system for easy installation and maintence. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is three beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 3 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) How to choose active infrared beams There are different beams quantity such as 2 beams, 3 beams, 4 beams, 6 beams and 8 beams of photoelectric beam sensor. So, how many beams should I choose? The more beams means higher of protection height and longer of detection distance. For example, if the distance between two infrared holes is 35mm, then, for 3 beams sensor, the protection height is 70mm. For 4 beams sensor, any two neighbor beams are blocked, it will trigger alarm. Same for 6 beams or 8 beams sensor. So more beams will be with more security such as for bank. More beams means more power of infrared beam transmission and with stronger penetration to against interference of fog, sunshine etc. And what does the infrared detection distance mean? It means the distance between the transmission terminal and receiving terminal. The actual installation distance should be less than 80% of the specified distance. For example, the specified detection distance is 100m, then the actual installation detection distance should be less than 80m. If no interference, the detection can reach to 6 times of specified distance. (6*100=600m). But environment interference should be considered for using. There are some rules for active infrared beam installation. For example, if the beam sensor is installed on a low wall, the distance between the top of the wall and the lowest infrared hole should be around 150mm. Because the size of a normal person is 500mm(width)*200mm(thickness), that will avoid intrusion of people from bottom side of the beam sensor and false alarm triggered by small animals. HB solar power infrared beam system can be easy calibrated. 1. Make sure that the eye can see the other end through the mechanical calibration hole at one end. 2. Ensure that the LCD displayed figures are large and stable.

$79.00

Add to Cart

1000 zones wireless alarm control panel security service HB-G250

HB brand solar powered wireless perimeter break beam, solar power PIR, solar power fence grating system compatible wireless receiver center alarm panel and securty service equipment. HB-G250 has 8 wired zones and 992 wireless zones capacity. It is used for community security service with CMS software installed for PC windows operation and management. It has wired keypad for easy program detectors and zones. HB-G250 can equip with TCP/IP communication with RS485 interface and App monitor is available with it. Easy to build up security service center with HB-G250 alarm panel (refer to how to build up security service center at https://www.vedard.com/blog) with all types perimeter wireless security beams, detectors, indoor motion sensor, door contact, panic button, smoke detector, gas sensor, water leakage detector. Packing list: 1. PSTN alarm host X1 (ademco contact id protocol) 2.Wired alarm key panel X1 3. wireless remote X1 Product Introduction 1.8 wired and 992 wireless programmable defense areas. (Can work with same brand wireless detectors only) 2. Ademco Contact Id communication protocol. 3. 5 modes of defenses: departure defense, perimeter defense, single area defense, time delay defense, long distance defense. 4. 5 types of defense areas: instant defense area, time delay defense area, 24 hours defense area, perimeter defense and by-pass defense area. 5. 4 modes of disarming: password keyboard disarming, wireless remote control disarming, long distance disarming, alarm disarming. 6. Able to arrange defense, disarm the alarm, and emergency alarm by remote control. 7. Two sets of user passwords and one set of installation password. 8. Can prerecord 10-20s voice alarm. 9. It can dial 4 sets of telephone number (fixed or mobile phone number) and one set of alarm center number. 10. Parameter related to recording, monitoring, remote control, type of defense areas and telephone line inspection can be set as required through the key panel. It is tamper-resistant and lightening-proof. 11. With 110-220VAC power supply and 12V/7Ah backup battery. It can be accessed by a monitor head and at most 4 key panel. 12. Equipped with "watchdog" function so as to prevent the dead of halt of the system. low battery power alarm, non working alarm etc. 13. The receiving frequency is 443MHz.

$132.00

Add to Cart

Wireless infrared beam security system 4-beams

4-beams solar power wireless alarm intrusion security system. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. 4 beams 100m infrared detection distance New wireless beams detector easy perimeter security equipment installation and no interference. Self-contained solar powered motion sensor alarm with sound. Built-in speaker and sound can be set as 5-60s or mute. Loud sound of 60dB. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is 4 beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 4 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:590*84*45mm 17.Distance between infrared light hole: 35mm

$93.00

Add to Cart

Break beam solar power wireless 6-beam perimeter intrusion alarm

6-beams solar power wireless alarm intrusion security system. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. 6 beams 100m infrared detection distance New wireless beams detector easy perimeter security equipment installation and no interference. Self-contained solar powered motion sensor alarm with sound. Built-in speaker and sound can be set as 5-60s or mute. Loud sound of 60dB. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is six beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 6 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:840*84*45mm 17.Distance between infrared light hole: 35mm

$123.50

Add to Cart