Outdoor security equipment solar power wireless infrared grating. The photoelectric grating works in pair with transmitter and receiver terminal as invisible light wall to block break-in through windows, fence, balcony. Easy installation with 3 steps: 1. Fix the terminal on wall. 2. Calibrate the transmitter and receiver beams via Laser pointer or by eye. 3. Tighten the screws. Package: 1 pair 4 beams solar power wireless infrared grating. 1 English user manual. 1 set fixing kits. Product feature: 1. Innovated design with solar power and RF & FSK wireless communication. 2. Strong interference resistance from sun light and any other types of infrared light with encryption technology. 3. More than 8 years of solar power battery life. 4. High grade security with self check and report of fault. 5. Work with same brand wireless alarm panel with app remote monitor and timer arm/disarm setting. Functions and Specification: 1.It is four beams wireless outdoor infrared grating working by pairs of transmitter and receiver. 2.Irradiation distance:10m 3.Wireless Transmitting distance: 100m 4.Wireless frequency:433MHz 5.Maximum alarm times in 24 hours:<=50 times 6.Battery capacity: transmitting terminal: 500mA, receiving terminal: 500mA 7.Working temperature: -30℃~70℃ 8.Number of infrared beams: 4 beams 9.Working voltage:3.3V 10.Power storage type: LiFePO4 Battery 11.Static working current: transmitting terminal<=0.6mA, receiving terminal<=0.6mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1600Lux lighting >=1.5mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:620*48*56mm 17.Distance between two infrared light hole: 164mm between 1st group and 2nd group. 86mm between two holes in same group.
$74.00Courtyard, school, villa perimeter security equipment easy installing and maintence. 2 beams outdoor intruder alarm wireless communication remote monitor system. This is 2 beams with transmitter and receiver terminals as a pair to create light wall to block illegal invasion to private place. It can work with HB-5050G etc. with app monitor. It can be easy installed without any wiring. And with high security grade with self check and report of low battery, moving or any fault. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is 2 beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:60m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 2 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:265*84*45mm 17.Distance between infrared light hole: 35mm
$69.00Solar powered wireless infrared break beam system 3-beams photoelectric intruder alarm 3-beams transmitter and receiver break alarm system consist as a light wall to block intruders outside. It is used for wall, fence, yard intrusion prevention. Solar power wireless beam is innovated perimeter system for easy installation and maintence. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is three beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 3 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) How to choose active infrared beams There are different beams quantity such as 2 beams, 3 beams, 4 beams, 6 beams and 8 beams of photoelectric beam sensor. So, how many beams should I choose? The more beams means higher of protection height and longer of detection distance. For example, if the distance between two infrared holes is 35mm, then, for 3 beams sensor, the protection height is 70mm. For 4 beams sensor, any two neighbor beams are blocked, it will trigger alarm. Same for 6 beams or 8 beams sensor. So more beams will be with more security such as for bank. More beams means more power of infrared beam transmission and with stronger penetration to against interference of fog, sunshine etc. And what does the infrared detection distance mean? It means the distance between the transmission terminal and receiving terminal. The actual installation distance should be less than 80% of the specified distance. For example, the specified detection distance is 100m, then the actual installation detection distance should be less than 80m. If no interference, the detection can reach to 6 times of specified distance. (6*100=600m). But environment interference should be considered for using. There are some rules for active infrared beam installation. For example, if the beam sensor is installed on a low wall, the distance between the top of the wall and the lowest infrared hole should be around 150mm. Because the size of a normal person is 500mm(width)*200mm(thickness), that will avoid intrusion of people from bottom side of the beam sensor and false alarm triggered by small animals. HB solar power infrared beam system can be easy calibrated. 1. Make sure that the eye can see the other end through the mechanical calibration hole at one end. 2. Ensure that the LCD displayed figures are large and stable.
$79.00HB-ZJQ-3 HB brand solar power wireless beam sensor and other wireless device compatible wireless to wired adapter. It has 8 zones and works as an adapter to transfer HB wireless detectors alarm signal and fault signal to wired output. So, the perimeter security solar power wireless detectors can be easy to add to exist security alarm panel. It converts HB brand wireless solar powered active beams or grating signal to wired signal output for exist host. Main functions and features: 1.It enables the exist alarm system to add perimeter protection detectors easy. 2.DC12V power supply is required from the third party alarm host or other way. 3.It has 8 defense zones. Each zone learns maximum 6 detectors codes. Specification: 1.Operating voltage:12V~14V DC 2.Operating current:100mA ~150mA 3.Operating temperature:-30℃~70℃ 4.Wireless distance:100~300m(depending on power supply and operating condition)
$58.00Security Protection outdoor property, driveway, fence, forest perimeter security alarm system. Solar power wireless infrared detector. 8-20m (25-20 feet) at 15 degree detection range for protection of entrance, driveway, yard, forest. 8-10 years life time for battery. No wire and easy installation with IP66 waterproof and can work at extreme weather condition. Low power, fault alarm report. This product works as a sensor and need to work with same brand wireless compatible alarm panel to send alarm message. For example, HB-5050G can be used to receive alarm information with app remote monitoring. the outdoor motion sensor is waterproof(IP66),fully-enclosed design.the working temperature range is from -30 ℃ to 70℃ The sensor is powered by built-in rechargeable lithium ion battery which will be charged by the solar panel,so no need replace the battery.(PS. the sensor also can be powered by the DC5V-12V power adapter if the sensor be installed indoor or darkness areas) WIDE RANGE OF TRANSMISSION- the wireless range from the sensor to the alarm receiver is up to 1/4 mile(actual range will vary depending on the local terrain); the sensor range (detection distance) is up to 50 feet. (it has 3 sensitivities adjustable,Hi=50ft,Mid=30ft;Low=25ft)
$49.00Fence break prevention window intruder alarm, gate entrance security system. Solar power wireless outdoor illegal intrusion alert. It is updated wireless solar-powered and anti interference wall installation electronic grating. It can be installed on wall for gate, fence, window security protection. Functions and Specification: 1.It is 8 beams wireless outdoor infrared grating working by pairs of transmitter and receiver. 2.Irradiation distance:10m 3.Wireless Transmitting distance: 100m 4.Wireless frequency:433MHz 5.Maximum alarm times in 24 hours:<=50 times 6.Battery capacity: transmitting terminal: 500mA, receiving terminal: 500mA 7.Working temperature: -30℃~70℃ 8.Number of infrared beams: 8 beams 9.Working voltage:3.3V 10.Power storage type: LiFePO4 Battery 11.Static working current: transmitting terminal<=0.6mA, receiving terminal<=0.6mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1600Lux lighting >=1.5mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:1120*48*56mm 17.Distance between two infrared light hole: 164mm between 1st group and 2nd group. 86mm between two holes in same group.
$99.00Solar power perimeter security solution outdoor siren strobe wireless HB-JHD-2 Solar-power Wireless Warning Lamp can work with solar beams for driveway security system. Solar-power Warning Siren Strobe is with built-in sounder and high light lamp. It will illuminate the defense zone and make loud sound when alarm. It can learn maximum 32 wireless HB brand 433MHz wireless infrared beams, grating and remote controller. Function: 1. With power on/off button and low illumination sound indication. It will trigger alarm when it is off. 2. Can select alarm sound. 3. Can check power on/off status, device working status and test it. 4. Can use remote controller to arm, disarm, emergency alarm and cancel alarm. 5. It should be installed at place with enough sunlight. Specification: 1. Working voltage: 6.4V 2. Battery type: LiFePO4 battery 3. Battery capacity: 3000mAH 4. Static working rate current: 2mA 5. Wireless receiving distance: 300m at open area 6. Can enroll maximum 32 wireless devices including remote controller, wireless beam detector, panic button, door contact etc. 7. Working environment temperature:-30℃~70℃ 8. Alarm Volume: 90dB 9. High light LED luminous flux: 70 lm each 10. Dimension: 280*180*74mm
$79.004-beams solar power wireless alarm intrusion security system. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. 4 beams 100m infrared detection distance New wireless beams detector easy perimeter security equipment installation and no interference. Self-contained solar powered motion sensor alarm with sound. Built-in speaker and sound can be set as 5-60s or mute. Loud sound of 60dB. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is 4 beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 4 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:590*84*45mm 17.Distance between infrared light hole: 35mm
$93.006-beams solar power wireless alarm intrusion security system. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. 6 beams 100m infrared detection distance New wireless beams detector easy perimeter security equipment installation and no interference. Self-contained solar powered motion sensor alarm with sound. Built-in speaker and sound can be set as 5-60s or mute. Loud sound of 60dB. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is six beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:<=50 times 7.Infrared light beam number: 6 beams 8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh 9.Working temperature: -30℃~70℃ 10.Working voltage:3.3V 11.Power storage type: LiFePO4 Battery 12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA 13.Infrared light frequency: secondary modulation & encoding based on 38KHz 14.Infrared light wave-length: 940nm+/-20nm 15.Output current of solar panel: Under the condition of 1800Lux lighting >=4mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux) 16.Dimension:840*84*45mm 17.Distance between infrared light hole: 35mm
$123.50Solar & Wireless Beam Sensor 8-beams perimeter security intrusion alert and wireless alarm for public building, community security, farm security. Note: The sensor has built-in speaking for on-site warning. But it should be used with wireless same brand alarm control panel or wireless to wired transceiver and other brand wired panel for alarm signal sending, fault report to security service monitor company or personal mobile phone. App monitor panel is available with Wifi or GSM network with model number HB-5050 Features: Battery Powered&Solar Charged,no need cables. Up to 100 meters easy detection range. 1 KM wireless transmission Range. Multiple Detection Beams(to avoid false alarm--such as falling leaves or birds). Automatic Shielding of the sunlight interference. No external cables and the antenna inside the shell,so will not be damaged by the lightening strike. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Anti-interference,Using FSK+FHSS wireless transmission technology. 4/6/8 Beam Sensor has on-site alarm function. Technical Parameters Infrared Detection Range 100m Wireless Transmission Range 1KM Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity Transmitter:500mAh Receiver: 500mAh Static Working Current ≤1mA Infrared Wavelength 940nm±20nm Solar Panel Output Current 1800Lux illumination level: HB-T001Q8≥8mA (Remarks: The outdoor illumination intensity on rainy days is about 2000Lux) Working Temperature Range -30℃~70℃ Weight HB-T001Q8:4.8kg HB-T001Q8:1090×84×45(mm)
$138.00Fences, gardens, swimming pools, golf courses etc. outdoor property large open land security equipment. Solar power LED light with wireless photoelectric beam sensor for intrusion detection and alarm. The garden light LED will light on automatically at night and light off at day time. The LED light can continue work for about 5 days at cloudy days or rainy days. The 8-beams photoelectric IR detector inside the garden light pole works 24 hours to keep illegal intrusion outside. If there is intrusion entering into the blocked area, it will trigger sound alarm and send wireless alarm signal to remote receiver. Solar-Power garden light wall is ideal security equipment and lighting device for garden, golf courses, swimming pools. The solar panel will charge the IR beam firstly, then charge the garden LED light. It can work for about 10 years of battery life time. If change battery, it can continue working. Technical Parameters Infrared Detection Range 50m Wireless Transmission Range 700m Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity 6000mAh LED Power Consumption 1 W Infrared Wavelength 940nm±20nm Solar Panel Power Capability 2W Working Duration Solar charged for 8-12hours, Garden light can work 20hours continuously Barriers can work normally all the time no matter for rainy day or sunny days ) Working Temperature Range -30℃~70℃ Weight 17kg HB-T002A8:4.3kg Dimension 1400×φ150(mm) Solar&Wireless 8 Beam Barrier+Garden light Features: Battery Powered&Solar Charged,no need cables. Garden Lights turn on automatically at night and turn off automatically at day time. Multiple Detection Beams(to avoid false alarm--such as small pets). Dual direction is viable. Up to 50 meters easy detection range. 700 KM wireless transmission Range. (Need to buy same brand wireless alarm panel or receiver) Automatic Shielding of the sunlight interference. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Package: Each pair garden light wall will be packed into 3 packages, one for one pair garden light pole (with 8-beam photoelectric infrared detector inside), one for one pair LED lamp, one for base station. So, packing weight is 26kgs (much more than real weight) We can ship by sea or by air to air port if you can handle the import process at your side. Feel free to contact us.
$370.00