Addressable Fire Alarm Control Panel 1 to 64 loops ETL approval

Standard configuration of 2 loops addressable fire alarm control panel FW9000. ETL approval intelligent fire alarm control panel with good performance, flexible configuration and easy operation. Check information of alarm, fault and other operations is displayed by big LCD screen and can be printed by its built-in printer. The control panel supports 484 points two loops. If change installation, it can be extended to 64 loops. It can work with FW brand all types smoke detector, heat detector, manual call point, sounder strobes, modules and fireman's control panels to realize automatic fire alarm and control.
Features:
1. The fire alarm panel has 2 loops in standard configuration and one loop can access 242 points. (FW devices). If the installation mode is changed, the extended loop can be extended to 64 loops and connected to 15488 detectors.
2. The panel has 6 sets of direct start buttons, which correspond to 6 sets of DC24V output and 6 sets of feedback access contacts, and 24 sets of addressable start buttons.
3. The panel is equipped with two DC12V battery backup to ensure the system can operate normally without AC power supply.
4. The panel have one RS-232 interface for PC panel configuration tool. It has two RS485 communication port for other external device.
5. The panel is connected to the computer through RS232, and the loop information and linkage information can equipment.
6. The panel has micro printer and can automatically print out fire alarm information, fault information etc.
Specification:
1. Primary AC power supply: 220VAC 50/60Hz
2. Main supply output voltage (VDC): 27VDC &32VDC
3. Main supply output current: 2.5A at 27VDC, 3A at 32VDC
4. Minimum battery size 2*12V, DC12V/7Ah
5. Battery charging voltage (VDC): 27VDC
6. Battery charging current: 700mA
7. Sounder connector voltage output: 1Amp at 24VDC
8. DC24V connector voltage output: 1Amp at 24VDC
9. Fire feedback input end line resistor (Ohms): 10K
10. Fire feedback input contacts capacity: 2Amp at 24VDC
11. Printer: Built-in microwave printer
12. Computer interface: USB & RS232
13. Display: Graphical LCD 320*240
14. Operating humidity Range: 10%-93% relative humidity non-condensing.
15. Operating temperature: -10 to 50C
16. FACP dimension (L*W*D): 470mm*130mm*420mm
17. FACP net weight: 16.8kg